# \[Solved\] EM7565 Firmware Update from 01.00.02.00 to 01.07.00.00

**URL:** <https://forum.sierrawireless.com/t/solved-em7565-firmware-update-from-01-00-02-00-to-01-07-00-00/13010>\
**Category:** MC/EM Series\
**Created:** [July 1, 2018, 12:52pm UTC](https://forum.sierrawireless.com/t/solved-em7565-firmware-update-from-01-00-02-00-to-01-07-00-00/13010 "2018-07-01T12:52:47Z")\
**Posts on this page:** 1\
**Showing post:** 21

<div class="post-metadata">

**Author:** ![falkenber9](https://avatars.discourse-cdn.com/v4/letter/f/7ab992/32.png) [@falkenber9](https://forum.sierrawireless.com/u/falkenber9)\
**Post date:** [July 8, 2018, 1:34pm UTC](https://forum.sierrawireless.com/t/solved-em7565-firmware-update-from-01-00-02-00-to-01-07-00-00/13010/21 "2018-07-08T13:34:27Z")

</div>

> [@falkenber9](#):
>
> I switched the chassis and put the em7565 into an M.2 to MiniPCIe adapter ( [https://techship.com/products/m2mu2/](https://techship.com/products/m2mu2/) ), which in turn is connected to a MiniPCIe USB adapter.  
> Since I had success to update an EM7455 with that configuration, I tried my EM7565 now.  
> By this, the modem now comes up in Download Mode (PID 9090 instead of 9091) and firmware download applications continue their work… at least for one step.

I have some additional information regarding a suitable chassis/adapter for firmware update:  
The signal line for Dynamic Power Control (DPR), located on pin 25, must not be attached to GND, when doing a firmware update (or when issuing the AT!BOOTHOLD) command. Otherwise the EM7565 comes up in normal mode, instead of the download mode.  
In the chassis I mentioned above the DPR signal was set to GND via jumper (default from stock). In contrast, the M.2 to MiniPCIe adapter leaves this pin floating.  
Removing the jumper connection did the trick for that chassis and the included module comes up with PID 9090 instead of 9091 after issuing AT!BOOTHOLD.

Maybe the information about this behaviour might be included into the manuals and release notes, as I didn’t find anything about it in those documents.

Regards  
Robert

---

_[View the full topic](https://forum.sierrawireless.com/t/solved-em7565-firmware-update-from-01-00-02-00-to-01-07-00-00/13010)._
