# Socket UDP

**URL:** <https://forum.sierrawireless.com/t/socket-udp/5026>\
**Category:** Legacy FX/FXT series\
**Created:** [April 19, 2011, 4:08pm UTC](https://forum.sierrawireless.com/t/socket-udp/5026 "2011-04-19T16:08:35Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![warriorsoul](https://avatars.discourse-cdn.com/v4/letter/w/c4cdca/32.png) [@warriorsoul](https://forum.sierrawireless.com/u/warriorsoul)\
**Post date:** [April 19, 2011, 4:08pm UTC](https://forum.sierrawireless.com/t/socket-udp/5026/1 "2011-04-19T16:08:35Z")

</div>

I need to program my gl6100 an UDP socket to send data.  
anyone can help me?

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [April 19, 2011, 4:25pm UTC](https://forum.sierrawireless.com/t/socket-udp/5026/2 "2011-04-19T16:25:45Z")

</div>

What “help”, exactly, do you need?

Have you discussed your requirements with your Distributor?

What thought have you given this so far?

Where are you stuck?

---

<div class="post-metadata">

**Author:** ![warriorsoul](https://avatars.discourse-cdn.com/v4/letter/w/c4cdca/32.png) [@warriorsoul](https://forum.sierrawireless.com/u/warriorsoul)\
**Post date:** [April 19, 2011, 5:58pm UTC](https://forum.sierrawireless.com/t/socket-udp/5026/3 "2011-04-19T17:58:01Z")

</div>

Hi.  
I’m trying to create an UDP socket, I had seen some examples with AirPrime  
but I need a way to create using my GL6100 I need the AT commands to do this.  
Send some data to a server UDP.  
or how can I program to exchange data?

I try to do this, but GL6100 doesn’t recognize AT WIPCFG and WIPBR

AT+WIPCFG=1  
OK  
//start IP stack  
AT+WIPBR=1,6  
OK  
//open GPRS bearer  
AT+WIPBR=2,6,11,”APN name”  
OK  
//set APN name of GPRS bearer  
AT+WIPBR=2,6,0,”user name”  
OK  
//set user name  
AT+WIPBR=2,6,1,”passwd”  
OK  
//set password  
AT+WIPBR=4,6,0  
OK  
//start GPRS bearer  
AT+WIPCREATE=1,1,80,”[www.wavecom.com](http://www.wavecom.com)”,80  
//create a UDP client towards peer IP device @  
//“[www.wavecom.com](http://www.wavecom.com)” , port 80  
OK //all parameters and IP stack behavior are OK  
+WIPREADY: 1,1 //unsolicited: the UDP client socket is “pseudo” connected  
//to the peer (no //real connection is //UDP)  
WA\_DEV\_WISMO\_UGD\_012 Rev 003 January 14, 2011 204  
AT Command Manual for Firmware L22 TCP/IP Commands  
AT+WIPDATA=1,1,1  
CONNECT  
//exchange data on socket idx 1:  
… //read, write  
+++ //switch to AT mode

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [April 19, 2011, 6:46pm UTC](https://forum.sierrawireless.com/t/socket-udp/5026/4 "2011-04-19T18:46:37Z")

</div>

The very first question is:

[size=150]Have you discussed your requirements with your Distributor?[/size]

They will be able to ensure that you have the necessary accesories, tools, etc…

---

<div class="post-metadata">

**Author:** ![warriorsoul](https://avatars.discourse-cdn.com/v4/letter/w/c4cdca/32.png) [@warriorsoul](https://forum.sierrawireless.com/u/warriorsoul)\
**Post date:** [April 28, 2011, 9:29pm UTC](https://forum.sierrawireless.com/t/socket-udp/5026/5 "2011-04-28T21:29:41Z")

</div>

hello again.

I’ve been sending mails to my dealer but He don’t response them. but I think I have the necesary things to create a conexion.

Could you help me with my problem?

Beste Regards. Gabriel.