# Socket Application,AT commands

**URL:** https://forum.sierrawireless.com/t/socket-application-at-commands/718
**Category:** Open AT
**Created:** [September 25, 2006, 9:06am UTC](https://forum.sierrawireless.com/t/socket-application-at-commands/718 "2006-09-25T09:06:53Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![ergunehm](https://avatars.discourse-cdn.com/v4/letter/e/ac91a4/32.png) [@ergunehm](https://forum.sierrawireless.com/u/ergunehm)
#### Post date: [September 25, 2006, 9:06am UTC](https://forum.sierrawireless.com/t/socket-application-at-commands/718/1 "2006-09-25T09:06:53Z")

</div>

Hi friends!

I want to implement a socket application.To do this, I think some commands must be.For example to make the definition of socket , to open socket etc…But I couldn’t find anything about socket applications in the AT commands interface guide.Even There is any word in it which includes ‘socket’.

What is the way of opening a socket in Open AT?

Thanks…

Best Regards…

---

<div class="post-metadata">

### Author: ![gmnvh](https://avatars.discourse-cdn.com/v4/letter/g/dbc845/32.png) [@gmnvh](https://forum.sierrawireless.com/u/gmnvh)
#### Post date: [September 25, 2006, 9:26pm UTC](https://forum.sierrawireless.com/t/socket-application-at-commands/718/2 "2006-09-25T21:26:25Z")

</div>

TCP Socket example using Open AT 8)

[wavecom.com/modules/movie/sc … highlight=](http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?t=636&highlight=)

---

<div class="post-metadata">

### Author: ![ergunehm](https://avatars.discourse-cdn.com/v4/letter/e/ac91a4/32.png) [@ergunehm](https://forum.sierrawireless.com/u/ergunehm)
#### Post date: [September 26, 2006, 2:20am UTC](https://forum.sierrawireless.com/t/socket-application-at-commands/718/3 "2006-09-26T02:20:51Z")

</div>

> [@gmnvh](#):
>
> TCP Socket example using Open AT 8)
> 
> [wavecom.com/modules/movie/sc … highlight=](http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?t=636&highlight=)

Thanks gmnvh,

Isn’t there any at command which provides socket definition and opening?Can we do that using only at command handling from Hyper Terminal before writing a code in module.

Thanks,

---

<div class="post-metadata">

### Author: ![gmnvh](https://avatars.discourse-cdn.com/v4/letter/g/dbc845/32.png) [@gmnvh](https://forum.sierrawireless.com/u/gmnvh)
#### Post date: [September 27, 2006, 3:06pm UTC](https://forum.sierrawireless.com/t/socket-application-at-commands/718/4 "2006-09-27T15:06:27Z")

</div>

You can do that using the AT# commands, but you need to run the edSoft at the module before it.

So, or you use AT# or you use your own application. You can not use both at the same time.

Gus