# SMS/Call notification when - PPPOS

**URL:** <https://forum.sierrawireless.com/t/sms-call-notification-when-pppos/13536>\
**Category:** Legacy HL Series\
**Created:** [August 17, 2018, 1:02pm UTC](https://forum.sierrawireless.com/t/sms-call-notification-when-pppos/13536 "2018-08-17T13:02:17Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![arjundongre](https://avatars.discourse-cdn.com/v4/letter/a/58f4c7/32.png) [@arjundongre](https://forum.sierrawireless.com/u/arjundongre)\
**Post date:** [August 17, 2018, 1:02pm UTC](https://forum.sierrawireless.com/t/sms-call-notification-when-pppos/13536/1 "2018-08-17T13:02:17Z")

</div>

Hi all,  
In my project I am interfacing **HL6528** with **ARM** microcontroller using Serial port.  
I made PPP over Serial (using LwIP stack), which works fine.

```
     When the dial-up connection(PPPOS) is running, the modem could not notify incoming SMS or Voice CAll.

    How can I get notification on incoming call/SMS, when there is PPPoS?
```

---

<div class="post-metadata">

**Author:** ![Sierra\_klin1](https://avatars.discourse-cdn.com/v4/letter/s/8e7dd6/32.png) [@Sierra\_klin1](https://forum.sierrawireless.com/u/Sierra_klin1)\
**Post date:** [August 20, 2018, 3:01am UTC](https://forum.sierrawireless.com/t/sms-call-notification-when-pppos/13536/2 "2018-08-20T03:01:39Z")

</div>

Hi,

You can set “AT+KRIC=3,1”, then

- When incoming a SMS, RI will be activated with one pulse(1s width of the pulse)
- When incoming a call, RI will be always activated.

When pppos is runing, the modem is in data mode(after CONNECT).  
Once you detect the RI activated, you can exit data mode by +++ to read the SMS(AT+CMGR) or answer the call by ATA.  
To switch back to data mode, you can use ATO.

---

<div class="post-metadata">

**Author:** ![arjundongre](https://avatars.discourse-cdn.com/v4/letter/a/58f4c7/32.png) [@arjundongre](https://forum.sierrawireless.com/u/arjundongre)\
**Post date:** [September 5, 2018, 7:28am UTC](https://forum.sierrawireless.com/t/sms-call-notification-when-pppos/13536/3 "2018-09-05T07:28:59Z")

</div>

Hi Sierra\_klin1,  
Sorry for the delayed reply,  
After enabling Ring Indicator, Calls & SMSs are detecting .  
Thank you very much for your useful information.
