# SL6087 resets every 30s after removing the application

**URL:** <https://forum.sierrawireless.com/t/sl6087-resets-every-30s-after-removing-the-application/7227>\
**Category:** Legacy AirPrime modules\
**Created:** [May 28, 2014, 4:44pm UTC](https://forum.sierrawireless.com/t/sl6087-resets-every-30s-after-removing-the-application/7227 "2014-05-28T16:44:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![benG](https://avatars.discourse-cdn.com/v4/letter/b/b3f665/32.png) [@benG](https://forum.sierrawireless.com/u/benG)\
**Post date:** [May 28, 2014, 4:44pm UTC](https://forum.sierrawireless.com/t/sl6087-resets-every-30s-after-removing-the-application/7227/1 "2014-05-28T16:44:29Z")

</div>

Hello,

I have a SL6087 module with firmware R7.51.2, then I removed the open AT application from the chip and it can’t stop resetting. Can someone tell me why and how to stop it? Thank you!

---

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://forum.sierrawireless.com/u/lotam)\
**Post date:** [May 29, 2014, 3:27am UTC](https://forum.sierrawireless.com/t/sl6087-resets-every-30s-after-removing-the-application/7227/2 "2014-05-29T03:27:29Z")

</div>

Hi,

How you remove the OpenAT application?

Does AT command still possible?  
If yes, please try to send AT+WOPEN=0 and see if issue improved.

Thx.

---

<div class="post-metadata">

**Author:** ![benG](https://avatars.discourse-cdn.com/v4/letter/b/b3f665/32.png) [@benG](https://forum.sierrawireless.com/u/benG)\
**Post date:** [June 2, 2014, 7:53am UTC](https://forum.sierrawireless.com/t/sl6087-resets-every-30s-after-removing-the-application/7227/3 "2014-06-02T07:53:58Z")

</div>

Hi,

Thanks for the reply!  
I removed the OpenAT application through developer studio by mistake. And AT command still works. I also tried AT+WOPEN=0, but the issue still exists.

Thanks!