# Setup Issues **URL:** \ **Category:** AirLink routers\ **Created:** [February 10, 2016, 3:47pm UTC](https://forum.sierrawireless.com/t/setup-issues/8430 "2016-02-10T15:47:23Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![sarcher](https://avatars.discourse-cdn.com/v4/letter/s/5f8ce5/32.png) [@sarcher](https://forum.sierrawireless.com/u/sarcher)\ **Post date:** [February 10, 2016, 3:47pm UTC](https://forum.sierrawireless.com/t/setup-issues/8430/1 "2016-02-10T15:47:23Z")
I am using my ES440 to provide internet access to a Cisco ASA5505 IFW. Service provider is ATT and I have a static IP assigned. I would think this should be a simple pass thru device with very little configuration but I have not figured out what I am missing. I was able to get it working and test it with a simple ping or try VPN/specialized services intermittently at best, I reset it to factory defaults to start from scratch but no joy. I have done this more than once with a cradle point router and it was a 5 minute process to assign the IP info and get the IFW on the net. Any Help would be appreciated. ---
**Author:** ![Rex\_alex](https://avatars.discourse-cdn.com/v4/letter/r/73ab20/32.png) [@Rex\_alex](https://forum.sierrawireless.com/u/Rex_alex)\ **Post date:** [February 16, 2016, 5:27am UTC](https://forum.sierrawireless.com/t/setup-issues/8430/2 "2016-02-16T05:27:34Z")
Hi, I didn’t get your point. what exactly is the issue you are facing?? -Alex