# Send MMS via GL6110 USB

**URL:** <https://forum.sierrawireless.com/t/send-mms-via-gl6110-usb/4774>\
**Category:** GL Series\
**Created:** [December 14, 2010, 7:49am UTC](https://forum.sierrawireless.com/t/send-mms-via-gl6110-usb/4774 "2010-12-14T07:49:51Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![lklklk9999](https://avatars.discourse-cdn.com/v4/letter/l/a4c791/32.png) [@lklklk9999](https://forum.sierrawireless.com/u/lklklk9999)\
**Post date:** [December 14, 2010, 7:49am UTC](https://forum.sierrawireless.com/t/send-mms-via-gl6110-usb/4774/1 "2010-12-14T07:49:51Z")

</div>

Hello.

I just want to send MMS with GL6110. Please give me instructions ( or direction ) on how to do this. I need to use AT commands for this, do i? How to send AT commands? What programs i can use to send these commands?

I read “AT Commands Interface Guide for Firmware 7.44” but it is difficult to find useful information because i do not know anything about sending MMS with such devices. And i am not sure that such reading is right direction. May be i need to read some other documentation.

---

<div class="post-metadata">

**Author:** ![paruthiv](https://avatars.discourse-cdn.com/v4/letter/p/eb8c5e/32.png) [@paruthiv](https://forum.sierrawireless.com/u/paruthiv)\
**Post date:** [December 22, 2010, 9:53am UTC](https://forum.sierrawireless.com/t/send-mms-via-gl6110-usb/4774/2 "2010-12-22T09:53:56Z")

</div>

Hi  
I guess it not possible to send MMS using AT commands.You can refer to the sample application for MMS that is available in the Open AT Software suite under WIP plug in section.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [December 22, 2010, 11:32am UTC](https://forum.sierrawireless.com/t/send-mms-via-gl6110-usb/4774/3 "2010-12-22T11:32:03Z")

</div>

See the Application Note WM\_DEV\_OAT\_APN\_020, “AirPrime Multimedia Message Service”

For some reason, this isn’t listed under the AirLink GL61x0 downloads - but you can find it, for example, under the Fastrack XTend:

[sierrawireless.com/en/sitec … ev002.ashx](https://www.sierrawireless.com/en/sitecore/content/Sierra%20Wireless/Support/Downloads/AirLink/Programmable_Gateways/~/media/Support_Downloads/AirPrime/Application_notes/Multimedia_Message_Service_MMS_Application_Note-Rev002.ashx)

---

<div class="post-metadata">

**Author:** ![lklklk9999](https://avatars.discourse-cdn.com/v4/letter/l/a4c791/32.png) [@lklklk9999](https://forum.sierrawireless.com/u/lklklk9999)\
**Post date:** [December 23, 2010, 9:44am UTC](https://forum.sierrawireless.com/t/send-mms-via-gl6110-usb/4774/4 "2010-12-23T09:44:36Z")

</div>

thanks, i try to work with MMS example from WIP plugin package now.

---

<div class="post-metadata">

**Author:** ![mikepol](https://avatars.discourse-cdn.com/v4/letter/m/5fc32e/32.png) [@mikepol](https://forum.sierrawireless.com/u/mikepol)\
**Post date:** [November 22, 2011, 4:17am UTC](https://forum.sierrawireless.com/t/send-mms-via-gl6110-usb/4774/5 "2011-11-22T04:17:18Z")

</div>

there’s an example of how to send an mms using AT commands in the WIPAT\_Commands\_User\_Guide\_5.41.pdf on page 103