# RC7611-1 with EVK, antannas not working?

**URL:** <https://forum.sierrawireless.com/t/rc7611-1-with-evk-antannas-not-working/35570>\
**Category:** IoT Modules\
**Tags:** debug\
**Created:** [October 13, 2025, 3:51pm UTC](https://forum.sierrawireless.com/t/rc7611-1-with-evk-antannas-not-working/35570 "2025-10-13T15:51:25Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![maxence.robin](https://avatars.discourse-cdn.com/v4/letter/m/cdc98d/32.png) [@maxence.robin](https://forum.sierrawireless.com/u/maxence.robin)\
**Post date:** [October 13, 2025, 3:51pm UTC](https://forum.sierrawireless.com/t/rc7611-1-with-evk-antannas-not-working/35570/1 "2025-10-13T15:51:25Z")

</div>

Hi,

I’ve been trying for a few days to connect to a remote server using through TCP using an RC7611-1 module. Since i wasn’t able to achieve it on my PCB, i bought the official sierra EVK for RC76xx modules.

I tried the following manipulation with two different RC7611-1 modules, one of them being the one that was given with the EVK itself.

```plaintext
ati
Manufacturer: Sierra Wireless, Incorporated
Model: RC7611
Revision: SWI9X07H_00.08.20.00 d73df7 jenkins 2021/10/14 00:48:45
IMEI: 358026262056750
IMEI SV: 18
FSN: CV3095021716B1
+GCAP: +CGSM

OK

at+cpin?
+CPIN: READY

OK

at+cfun?
+CFUN: 1

OK

at+cgdcont?
+CGDCONT: 1,"IP","mmsbouygtel.com","0.0.0.0",0,0,0,0

OK

at+cgact?
+CGACT: 1,0

OK

at+cgact=1,1
+CME ERROR: no network service

at+cgatt=1
+CME ERROR: no network service

at+csq
+csq: 99,99

OK

at+creg?
+CREG: 0,0

OK

at+cgreg?
+CGREG: 0,0

OK

at+cereg?
+CEREG: 0,0

OK

at!band?
Index, Name
00, All bands

OK

at!selrat?
!SELRAT: 00, Automatic

OK

at!gstatus?
!GSTATUS:
Current Time: 552 Temperature: 27
Modem Mitigate Level: 0 ModemProc Mitigate Level: 0
Reset Counter: 1 Mode: ONLINE
System mode: LTE PS state: Not attached
IMS reg state: UNKNOWN IMS mode: Not Support
IMS Srv State: UNKNOWN SMS,UNKNOWN VoIP
LTE band: No band LTE bw: Unknown
LTE Rx chan: --- LTE Tx chan: ---
LTE CA state: ACTIVE LTE Scell band:No band
LTE Scell bw:Unknown LTE Scell chan: 42762
EMM state: Deregistered No Cell
RRC state: RRC Idle

PCC RxM RSSI: 0 RSRP (dBm): 0
PCC RxD RSSI: 0 RSRP (dBm): 0
SCC RxM RSSI: 0 RSRP (dBm): 0
SCC RxD RSSI: 0 RSRP (dBm): 0
Tx Power: -- TAC: 0000 (0)
RSRQ (dB): 0 Cell ID: 820EB030 (-2112966608)
SINR (dB): 0

OK

```

I was never able to have AT+CSQ return me something else than “99,99”.  
However, i used the same EVK with an HL8548 module and everything was working fine (same EVK configuration, same SIM card, same antenna). I was even able to connect to the remote server through TCP using the HL8548.

Am i missing an obvious configuration step ?

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [October 13, 2025, 4:01pm UTC](https://forum.sierrawireless.com/t/rc7611-1-with-evk-antannas-not-working/35570/2 "2025-10-13T16:01:16Z")

</div>

Rc7611 is for US market  
Now it is used in france network  
Not sure if the band is supported

---

<div class="post-metadata">

**Author:** ![maxence.robin](https://avatars.discourse-cdn.com/v4/letter/m/cdc98d/32.png) [@maxence.robin](https://forum.sierrawireless.com/u/maxence.robin)\
**Post date:** [October 13, 2025, 4:28pm UTC](https://forum.sierrawireless.com/t/rc7611-1-with-evk-antannas-not-working/35570/3 "2025-10-13T16:28:45Z")

</div>

Thanks for the reply, it indeed looks like this might be the issue, after investigating the bands more. We’ll have to test with the appropriate modules to be certain.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [October 13, 2025, 4:33pm UTC](https://forum.sierrawireless.com/t/rc7611-1-with-evk-antannas-not-working/35570/4 "2025-10-13T16:33:54Z")

</div>

see if you can use this variant

> **[RC7620-1 IoT Module](https://www.sierrawireless.com/iot-modules/smart-modules/rc7620-1)**
>
> The RC7620-1 module is part of the RC Series that lowers total cost of ownership (TCO) by offering a module with Ready-to-Connect embedded SIM to instantly connect devices anywhere in the world.

---

<div class="post-metadata">

**Author:** ![maxence.robin](https://avatars.discourse-cdn.com/v4/letter/m/cdc98d/32.png) [@maxence.robin](https://forum.sierrawireless.com/u/maxence.robin)\
**Post date:** [October 13, 2025, 4:42pm UTC](https://forum.sierrawireless.com/t/rc7611-1-with-evk-antannas-not-working/35570/5 "2025-10-13T16:42:41Z")

</div>

Yes we chosed this one too after your feedback, thanks for confirming it is the right choice.  
I’ll mark this post as solved and reopen one later if i encounter more trouble.

Thanks again jyijyi.
