# Qmicli causes ModemManager failure, no GPS location

**URL:** <https://forum.sierrawireless.com/t/qmicli-causes-modemmanager-failure-no-gps-location/35502>\
**Category:** MC/EM Series\
**Created:** [September 12, 2025, 1:13pm UTC](https://forum.sierrawireless.com/t/qmicli-causes-modemmanager-failure-no-gps-location/35502 "2025-09-12T13:13:51Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [September 12, 2025, 1:35pm UTC](https://forum.sierrawireless.com/t/qmicli-causes-modemmanager-failure-no-gps-location/35502/2 "2025-09-12T13:35:05Z")

</div>

How about disabling the modem manager and obtain gps coordinate with qmicli command?

> [@EM9191 - NMEA GPS Stream - Can not find the ttyUSB Interface](https://forum.sierrawireless.com/t/em9191-nmea-gps-stream-can-not-find-the-ttyusb-interface/28701/11):
>
> That is very bad. Then we will probably have to rely on other modules in the future, although we were very satisfied with the performance and stability of the SW modems.

Or you can get gps coordinate by AT command

---

_[View the full topic](https://forum.sierrawireless.com/t/qmicli-causes-modemmanager-failure-no-gps-location/35502)._
