# Q64/GS64/WMP100 module

**URL:** <https://forum.sierrawireless.com/t/q64-gs64-wmp100-module/5453>\
**Category:** Legacy AirPrime modules\
**Created:** [February 14, 2012, 11:02am UTC](https://forum.sierrawireless.com/t/q64-gs64-wmp100-module/5453 "2012-02-14T11:02:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mtanz0](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@mtanz0](https://forum.sierrawireless.com/u/mtanz0)\
**Post date:** [February 14, 2012, 11:02am UTC](https://forum.sierrawireless.com/t/q64-gs64-wmp100-module/5453/1 "2012-02-14T11:02:11Z")

</div>

Hello, is it true that the Q64 and GS64 are architectually the same, both using the WMP100 module, and therefore the firmware is interchangeable ?

Thanks, Michael.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [February 14, 2012, 1:48pm UTC](https://forum.sierrawireless.com/t/q64-gs64-wmp100-module/5453/2 "2012-02-14T13:48:38Z")

</div>

I don’t think that the Q64 actually uses a WMP100 as such - but it certainly is true that the architecture is the same and that Open-AT applications written for one can run on the other. (you obviously have to take care of differences in GPIOs, memory, etc).

I don’t know about GS64.

---

<div class="post-metadata">

**Author:** ![mtanz0](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@mtanz0](https://forum.sierrawireless.com/u/mtanz0)\
**Post date:** [February 18, 2012, 5:21pm UTC](https://forum.sierrawireless.com/t/q64-gs64-wmp100-module/5453/3 "2012-02-18T17:21:22Z")

</div>

Ok, so how can you please tell me how I get the Open AT framework flashed to this device. I have a Sony Ericsson GS64, which is the same as the Q64/WMP100 based devices.

It doesn’t recognize the standard commands which Developer Studio is attempting to send to it for firmware upgrade, the commands it is expecting are :

AT\*EDNLD

As discussed here in this document in your archive :

[archive.sierrawireless.com/resou … otocol.pdf](http://archive.sierrawireless.com/resources/AirPrime/GR64-GS64/Application_Notes/Gx64%20Software%20Upgrade%20Protocol.pdf)

I have tried M2MStudio 1.2 as well and it does not work. I have asked Sony Ericsson what is the appropriate tool, and then replied to contact you :

```auto
From what I can see here:

 

http://www.sonyericsson.com/cws/corporate/press/pressreleases/pressreleasedetails/wavecomtoacquiresonyericssonsm2mbusiness-20060320

 

Wavecom would be the people to ask about this now, their site is linked below:

 www.wavecom.com
```

They recommended the M2Mpower IDE II tool, as opposed to your M2MStudio. Where can I get this tool ? The chip in this device is a WMP100 compatible module, but the firmware is just not recongizing the commands sent to it by either Developer Studio or M2MStudio ? Where can I get the software that will issue the appropriate AT\*EDNLD commands for firmware upgrade, and an R65c firmware upgrade in binary format .bin, as opposed to .dwl, which I think is dependant on an internal Wavecoom bootloader.

Thanks, Michael.

---

<div class="post-metadata">

**Author:** ![SPI](https://avatars.discourse-cdn.com/v4/letter/s/f14d63/32.png) [@SPI](https://forum.sierrawireless.com/u/SPI)\
**Post date:** [March 2, 2012, 6:43am UTC](https://forum.sierrawireless.com/t/q64-gs64-wmp100-module/5453/4 "2012-03-02T06:43:24Z")

</div>

> [@mtanz0](#):
>
> Hello, is it true that the Q64 and GS64 are architectually the same, both using the WMP100 module, and therefore the firmware is interchangeable ?

No, they are not. Gx64 (GR64/GS64) have the same form factor as Q64. GRSoft app in GR library implements most of the AT commands present on GR64/GS64. The similarities end there. Firmware architecture, Firmware releases, baseband, bootloader, TCP/IP stack, etc are completely different.

Some inputs on your other posts in the forum about Gx64:

WMSN is present in Q64. It is not present on Gx64. It isn’t listed in Gx64 AT manual.

M2MPower IDE is a Gx64 specific IDE. It is not related to M2MStudio. There is no Open AT on Gx64. It had a different set of C based APIs.

R65c Firmware is compatible with Q64 and not with Gx64. If I remember correctly, 4-5 years ago, R5A was released as the final maintenance firmware for Gx64.