# Q24CLASSIC debugging option

**URL:** <https://forum.sierrawireless.com/t/q24classic-debugging-option/1381>\
**Category:** Legacy AirPrime modules\
**Created:** [June 8, 2007, 1:35pm UTC](https://forum.sierrawireless.com/t/q24classic-debugging-option/1381 "2007-06-08T13:35:42Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jayemb](https://avatars.discourse-cdn.com/v4/letter/j/3e96dc/32.png) [@jayemb](https://forum.sierrawireless.com/u/jayemb)\
**Post date:** [June 8, 2007, 1:35pm UTC](https://forum.sierrawireless.com/t/q24classic-debugging-option/1381/1 "2007-06-08T13:35:42Z")

</div>

Dear Friends,

I am testing my Q24 classic kit with UART interface,  
i am using RS232 signalling using a logic level shifter.  
if i send a command through RS232 to Wireless CPU, it is receiving the command and giving response with distortion.  
can you help to solve this problem

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [June 8, 2007, 3:47pm UTC](https://forum.sierrawireless.com/t/q24classic-debugging-option/1381/2 "2007-06-08T15:47:32Z")

</div>

> [@jayemb](#):
>
> and giving response with distortion.

What do you mean by that?

What is the nature of this “distortion”?

---

<div class="post-metadata">

**Author:** ![jayemb](https://avatars.discourse-cdn.com/v4/letter/j/3e96dc/32.png) [@jayemb](https://forum.sierrawireless.com/u/jayemb)\
**Post date:** [June 11, 2007, 5:01am UTC](https://forum.sierrawireless.com/t/q24classic-debugging-option/1381/3 "2007-06-11T05:01:46Z")

</div>

distortion in the sense that the grounding of the data signal is not going to zero level properly.

i personally suspect on the grounding options of Q24 CLASSIC module.

In datasheet they have mentioned as shielding legs to be used as ground; but in my practical case the Flash LED is glowing if 3.6V is given to shielding legs instead of giving ground.  
kindly suggest whether it is a problem with module or else with some other options,

if you need my circuit schematics, i will send it to you

Thanks,  
Jayaprakash

---

<div class="post-metadata">

**Author:** ![jan](https://avatars.discourse-cdn.com/v4/letter/j/ce7236/32.png) [@jan](https://forum.sierrawireless.com/u/jan)\
**Post date:** [June 11, 2007, 6:34am UTC](https://forum.sierrawireless.com/t/q24classic-debugging-option/1381/4 "2007-06-11T06:34:00Z")

</div>

Why would you not supply ground to the shielding???

Best Regards,  
Jan

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [June 11, 2007, 6:46am UTC](https://forum.sierrawireless.com/t/q24classic-debugging-option/1381/5 "2007-06-11T06:46:12Z")

</div>

> [@jayemb](#):
>
> In datasheet they have mentioned as shielding legs to be used as ground;

As Jan says, if the datasheet tells you to do that, why would you do anything else? 😮

And, if the datasheet tells you to do that, you don’t do it, and things don’t work - then, obviously, your first step must be to do what the datasheet tells you, mustn’t it!
