# Problems after "ed\_SocketSetConfig"

**URL:** <https://forum.sierrawireless.com/t/problems-after-ed-socketsetconfig/352>\
**Category:** Open AT\
**Created:** [March 16, 2006, 8:41pm UTC](https://forum.sierrawireless.com/t/problems-after-ed-socketsetconfig/352 "2006-03-16T20:41:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![sanabiovilela](https://avatars.discourse-cdn.com/v4/letter/s/8e8cbc/32.png) [@sanabiovilela](https://forum.sierrawireless.com/u/sanabiovilela)\
**Post date:** [March 16, 2006, 8:41pm UTC](https://forum.sierrawireless.com/t/problems-after-ed-socketsetconfig/352/1 "2006-03-16T20:41:30Z")

</div>

Hi, IÂ´m trying to set Socket Config everytime I lose connection or try to make the first one.

HereÂ´s what IÂ´m trying:  
Ret = ed\_SocketSetConfig(ED\_ID\_TCPSOCKET\_1, (ed\_SocketSetupParams\_t \*)&ServerParam);

If Ret returns “0” it hasnÂ´t set configuration properly. What really happens when I donÂ´t get the “0”??

Sometimes I just canÂ´t set the configuration again.

Best Regards,

Henrique
