# Password for AT commands

**URL:** <https://forum.sierrawireless.com/t/password-for-at-commands/19336>\
**Category:** IoT Modules\
**Created:** [February 11, 2020, 1:22pm UTC](https://forum.sierrawireless.com/t/password-for-at-commands/19336 "2020-02-11T13:22:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![marcelo.ortega](https://avatars.discourse-cdn.com/v4/letter/m/b4bc9f/32.png) [@marcelo.ortega](https://forum.sierrawireless.com/u/marcelo.ortega)\
**Post date:** [February 11, 2020, 1:22pm UTC](https://forum.sierrawireless.com/t/password-for-at-commands/19336/1 "2020-02-11T13:22:40Z")

</div>

Hi,

```
   We are developing a product with an Airprime WP7609 module, using AT commands for the GPS. Some AT commands are password protected according to the user manual, and I have to send it using AT!SETCND command.
   How could I obtain this password?

   Thanks,

                        Marcelo
```

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [February 11, 2020, 3:08pm UTC](https://forum.sierrawireless.com/t/password-for-at-commands/19336/2 "2020-02-11T15:08:29Z")

</div>

You can use at!entercnd=“A710”