# OpenAT Program download issue on M1306B **URL:** \ **Category:** Legacy FX/FXT series\ **Created:** [December 7, 2007, 4:33am UTC](https://forum.sierrawireless.com/t/openat-program-download-issue-on-m1306b/1761 "2007-12-07T04:33:40Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![gregoryvtan](https://avatars.discourse-cdn.com/v4/letter/g/9fc29f/32.png) [@gregoryvtan](https://forum.sierrawireless.com/u/gregoryvtan)\ **Post date:** [December 7, 2007, 4:33am UTC](https://forum.sierrawireless.com/t/openat-program-download-issue-on-m1306b/1761/1 "2007-12-07T04:33:40Z")
Hi, I’m trying to download software which was written for the Supreme on the M1306B. It was recompiled with OpenAt 3.14.04, Firmware 657e with WIP 3.00.1030. Firmware on the M1306B: ati3 657c09gg.Q2406B 1956992 042407 11:29 at+wopen=2 +WOPEN: 2,“AT v03.12”,“AT v03.14” The problem is the download stops halfway. as follows: at+wdwl +WDWL: 0 \*\*\* END OF DOWNLOAD \*\*\* I’m using hardware flow control; tried baudrates 4800, 9600, 115200 … any suggestion to get around this? my distributor says I shouldn’t have any problems and asked me to check if any OpenAT programmes are running … but: at+wopen? +WOPEN: 0 OK So please any suggestion would be helpful. TIA, Greg ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [December 7, 2007, 6:51am UTC](https://forum.sierrawireless.com/t/openat-program-download-issue-on-m1306b/1761/2 "2007-12-07T06:51:20Z")
> [@gregory\_v\_tan](#): > > Firmware on the M1306B: > ati3 > 657c09gg.Q2406B 1956992 042407 11:29 > at+wopen=2 > +WOPEN: 2,“AT v03.12”,“AT v03.14” Surely something wrong there?! 😮 The two version numbers should be the same… ---
**Author:** ![gregoryvtan](https://avatars.discourse-cdn.com/v4/letter/g/9fc29f/32.png) [@gregoryvtan](https://forum.sierrawireless.com/u/gregoryvtan)\ **Post date:** [December 7, 2007, 7:03am UTC](https://forum.sierrawireless.com/t/openat-program-download-issue-on-m1306b/1761/3 "2007-12-07T07:03:06Z")
Thanks … I think I need to contact my distributor … they gave me the firmware … Greg ---
**Author:** ![tobias](https://avatars.discourse-cdn.com/v4/letter/t/c67d28/32.png) [@tobias](https://forum.sierrawireless.com/u/tobias)\ **Post date:** [December 7, 2007, 7:13am UTC](https://forum.sierrawireless.com/t/openat-program-download-issue-on-m1306b/1761/4 "2007-12-07T07:13:09Z")
Even if the OpenAT versions are different, the download should not stop in the middle like that. If it should stop somewhere it’s at the very start of the download. ---
**Author:** ![chk](https://avatars.discourse-cdn.com/v4/letter/c/57b2e6/32.png) [@chk](https://forum.sierrawireless.com/u/chk)\ **Post date:** [December 7, 2007, 10:28am UTC](https://forum.sierrawireless.com/t/openat-program-download-issue-on-m1306b/1761/5 "2007-12-07T10:28:16Z")
Hi Gregory, There are several things to check: - Have you downloaded the dwl.dwl provided with the 6.57c? - The OS compatible with 6.57c is 3.13 and not 3.14, so you need to use 6.57e or compile your application with OS3.13. - You said that te application has been written for the Supreme. Have you ported it to OS3.13? (wm\_CustomStack to modify for example…) ---
**Author:** ![gregoryvtan](https://avatars.discourse-cdn.com/v4/letter/g/9fc29f/32.png) [@gregoryvtan](https://forum.sierrawireless.com/u/gregoryvtan)\ **Post date:** [December 7, 2007, 11:07am UTC](https://forum.sierrawireless.com/t/openat-program-download-issue-on-m1306b/1761/6 "2007-12-07T11:07:46Z")
Well, my distributor didn’t give me the dwl.dwl file … nor instructions about it. hmmm … I’ll have to make sure they give me 657e (there are a lot of firmware files with 3.14 OpenAT, all 657e, but I’m not sure which one to download). And yes, i have a #ifdef for the different stack declaration … my software works in RTE mode on the 3.14, as well as 4.22a, and burned into a Fasttrack Supreme 10). Thanks for all the help, Greg