# OpenAT (4.21.01) Project Wizard Problem

**URL:** <https://forum.sierrawireless.com/t/openat-4-21-01-project-wizard-problem/1818>\
**Category:** Development tools\
**Created:** [January 11, 2008, 9:08am UTC](https://forum.sierrawireless.com/t/openat-4-21-01-project-wizard-problem/1818 "2008-01-11T09:08:38Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![rajendrams](https://avatars.discourse-cdn.com/v4/letter/r/ccd318/32.png) [@rajendrams](https://forum.sierrawireless.com/u/rajendrams)\
**Post date:** [January 11, 2008, 9:08am UTC](https://forum.sierrawireless.com/t/openat-4-21-01-project-wizard-problem/1818/1 "2008-01-11T09:08:38Z")

</div>

I am using OpenAT(4.21.01) installed at D:\OpenAT.  
For creating an application using OpenAT Project Wizard, I followed all the steps as mentioned in Section 2 of “TU\_Tutorial\_for\_Open\_AT.pdf”. I have made sure that the IDE settings are also correct.  
After clicking Ok on the wizard (IDE as Eclipse), I get following errors in the dosshell:  
Loading Open AT IDE…  
bash.exe: warning: could not create /tmp!  
./LoadIde.sh: line 94: cmd: command not found  
./LoadIde.sh: line 149: /bin/mkdir: No such file or directory  
Done

After that, Eclipse IDE launches with no project created. In the project directory, only a .metadata folder and a wmnew.wzrd (1KB size) file is created.  
If I select Microsoft Visual C++ 6.0 as the IDE in the OpenAT Project Wizard, then following error is received:  
“.dsw file not found, Please verify that the path and file name are correct.”  
And no .dsw is created.

So in any case, I am not able to use the Project Wizard for creating an application.

Am I missing something?  
Please help me out.

---

<div class="post-metadata">

**Author:** ![wismo\_coder](https://avatars.discourse-cdn.com/v4/letter/w/6bbea6/32.png) [@wismo\_coder](https://forum.sierrawireless.com/u/wismo_coder)\
**Post date:** [January 11, 2008, 10:00am UTC](https://forum.sierrawireless.com/t/openat-4-21-01-project-wizard-problem/1818/2 "2008-01-11T10:00:44Z")

</div>

That sounds like a cygwin problem. If you have other cygwin installations, try to uninstall them and re-install the OpenAT SDK. That’s how I once solved the problem…

---

<div class="post-metadata">

**Author:** ![rajendrams](https://avatars.discourse-cdn.com/v4/letter/r/ccd318/32.png) [@rajendrams](https://forum.sierrawireless.com/u/rajendrams)\
**Post date:** [January 11, 2008, 11:13am UTC](https://forum.sierrawireless.com/t/openat-4-21-01-project-wizard-problem/1818/3 "2008-01-11T11:13:37Z")

</div>

I have already uninstalled my earlier cygwin. And then again installed OpenAT. But the problem is still there.

---

<div class="post-metadata">

**Author:** ![rajendrams](https://avatars.discourse-cdn.com/v4/letter/r/ccd318/32.png) [@rajendrams](https://forum.sierrawireless.com/u/rajendrams)\
**Post date:** [January 14, 2008, 10:16am UTC](https://forum.sierrawireless.com/t/openat-4-21-01-project-wizard-problem/1818/4 "2008-01-14T10:16:21Z")

</div>

The bash errors we were facing got resolved by doing following:  
The “bash.exe: warning: could not create /tmp!” and “./LoadIde.sh: line 149: /bin/mkdir: No such file or directory” errors were solved by deleting the registry entry of previously installed cygwin.

The “./LoadIde.sh: line 94: cmd: command not found” error was solved by modifying the PATH variable to include “D:\WINNT” and “D:\WINNT\system32”.