# Not seeing IP allocated for connected profile ( with AT+CGDCONT? command)

**URL:** <https://forum.sierrawireless.com/t/not-seeing-ip-allocated-for-connected-profile-with-at-cgdcont-command/24551>\
**Category:** Uncategorized\
**Created:** [August 12, 2021, 5:04pm UTC](https://forum.sierrawireless.com/t/not-seeing-ip-allocated-for-connected-profile-with-at-cgdcont-command/24551 "2021-08-12T17:04:37Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![krishnadaskv](https://avatars.discourse-cdn.com/v4/letter/k/e274bd/32.png) [@krishnadaskv](https://forum.sierrawireless.com/u/krishnadaskv)\
**Post date:** [August 12, 2021, 5:04pm UTC](https://forum.sierrawireless.com/t/not-seeing-ip-allocated-for-connected-profile-with-at-cgdcont-command/24551/1 "2021-08-12T17:04:38Z")

</div>

I used the following commands,

```auto
AT+CGDCONT=1,"IPV4V6","apn.com"
OK
at+cgdcont?
+CGDCONT: 1,"IPV4V6","apn.com","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0

OK
AT+CGATT=1
OK
AT+CGACT=1,1
OK
AT+CGPADDR=1
+CGPADDR: 1,10.127.149.31

OK
aT+cgDCONT?
+CGDCONT: 1,"IPV4V6","apn.com","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0

OK

```

I am seeing only long zeros. ( The APN also contains username and password, I am not sure where to configure that)

---

<div class="post-metadata">

**Author:** ![Donald](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@Donald](https://forum.sierrawireless.com/u/Donald)\
**Post date:** [August 12, 2021, 11:49pm UTC](https://forum.sierrawireless.com/t/not-seeing-ip-allocated-for-connected-profile-with-at-cgdcont-command/24551/2 "2021-08-12T23:49:17Z")

</div>

Hi krishnadaskv,

What kind of module and firmware version are you using?  
ATI  
ATI3

---

<div class="post-metadata">

**Author:** ![krishnadaskv](https://avatars.discourse-cdn.com/v4/letter/k/e274bd/32.png) [@krishnadaskv](https://forum.sierrawireless.com/u/krishnadaskv)\
**Post date:** [August 13, 2021, 6:56am UTC](https://forum.sierrawireless.com/t/not-seeing-ip-allocated-for-connected-profile-with-at-cgdcont-command/24551/3 "2021-08-13T06:56:56Z")

</div>

I am using EM7455 module with generic firmware

---

<div class="post-metadata">

**Author:** ![Donald](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@Donald](https://forum.sierrawireless.com/u/Donald)\
**Post date:** [August 13, 2021, 9:29am UTC](https://forum.sierrawireless.com/t/not-seeing-ip-allocated-for-connected-profile-with-at-cgdcont-command/24551/4 "2021-08-13T09:29:44Z")

</div>

Hi krishnadaskv,

+CGPADDR: Show PDP address  
You can use AT+CGPADDR command to show PDP Address.  
If you want an active data connection, You can enter AT!SCACT=1,1 command.  
I have attached the log file for your reference. [log.txt](https://forum.sierrawireless.com/uploads/short-url/e582zPiVwksZKW0s2RnkqvIMmhV.txt) (1.2 KB)

---

<div class="post-metadata">

**Author:** ![krishnadaskv](https://avatars.discourse-cdn.com/v4/letter/k/e274bd/32.png) [@krishnadaskv](https://forum.sierrawireless.com/u/krishnadaskv)\
**Post date:** [August 13, 2021, 10:05am UTC](https://forum.sierrawireless.com/t/not-seeing-ip-allocated-for-connected-profile-with-at-cgdcont-command/24551/5 "2021-08-13T10:05:17Z")

</div>

Thanks for that.

I am getting the following response for AT!SCACT?

```auto
AT!SCACT?

!SCACT: 1,0

```

---

<div class="post-metadata">

**Author:** ![krishnadaskv](https://avatars.discourse-cdn.com/v4/letter/k/e274bd/32.png) [@krishnadaskv](https://forum.sierrawireless.com/u/krishnadaskv)\
**Post date:** [August 13, 2021, 11:09am UTC](https://forum.sierrawireless.com/t/not-seeing-ip-allocated-for-connected-profile-with-at-cgdcont-command/24551/6 "2021-08-13T11:09:57Z")

</div>

I may need to do the username and password for the APN. But I don’t know how to do that. !!

---

<div class="post-metadata">

**Author:** ![Donald](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@Donald](https://forum.sierrawireless.com/u/Donald)\
**Post date:** [August 17, 2021, 11:21am UTC](https://forum.sierrawireless.com/t/not-seeing-ip-allocated-for-connected-profile-with-at-cgdcont-command/24551/7 "2021-08-17T11:21:56Z")

</div>

Hi krishnadaskv,

> [@krishnadaskv](#):
>
> ```auto
> AT!SCACT?
> 
> !SCACT: 1,0
> 
> ```

Please enter the commands below and share to me the responses:  
AT!ENTERCND=“A710”  
AT!USBCOMP=1,1,10D  
AT!RESET  
AT+COPS?  
AT!SCACT=1,1  
AT!SCACT?