# No response for AT+CCID in HL6528

**URL:** <https://forum.sierrawireless.com/t/no-response-for-at-ccid-in-hl6528/8120>\
**Category:** Legacy HL Series\
**Created:** [August 13, 2015, 6:31am UTC](https://forum.sierrawireless.com/t/no-response-for-at-ccid-in-hl6528/8120 "2015-08-13T06:31:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![prakash2983](https://avatars.discourse-cdn.com/v4/letter/p/c2a13f/32.png) [@prakash2983](https://forum.sierrawireless.com/u/prakash2983)\
**Post date:** [August 13, 2015, 6:31am UTC](https://forum.sierrawireless.com/t/no-response-for-at-ccid-in-hl6528/8120/1 "2015-08-13T06:31:31Z")

</div>

Hi all,

We are facing issue in HL6528 module in getting response for AT+CCID command.

Always getting time out for this command. After that all the AT commands got failure.

If we remove the CCID command, then modem works for all AT commands.

Kindly help us to sort out this issue.

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![Rex\_alex](https://avatars.discourse-cdn.com/v4/letter/r/73ab20/32.png) [@Rex\_alex](https://forum.sierrawireless.com/u/Rex_alex)\
**Post date:** [August 13, 2015, 9:25am UTC](https://forum.sierrawireless.com/t/no-response-for-at-ccid-in-hl6528/8120/2 "2015-08-13T09:25:58Z")

</div>

Hi,

just saw the AT command guide. Seems this command is implemented for HL8 only…

Thanks  
Alex

---

<div class="post-metadata">

**Author:** ![prakash2983](https://avatars.discourse-cdn.com/v4/letter/p/c2a13f/32.png) [@prakash2983](https://forum.sierrawireless.com/u/prakash2983)\
**Post date:** [August 13, 2015, 1:07pm UTC](https://forum.sierrawireless.com/t/no-response-for-at-ccid-in-hl6528/8120/3 "2015-08-13T13:07:06Z")

</div>

Hi Rex,

Thanks for the response.

Ya I saw the data sheet and it will support only for 85XX series module.

But this CCID command working in most of the HL6528 Modules that we have.

I hope this will fall under basic AT commands. ☹

Thanks once again.