# New Q24 plus module **URL:** \ **Category:** Legacy AirPrime modules\ **Created:** [July 10, 2007, 7:51am UTC](https://forum.sierrawireless.com/t/new-q24-plus-module/1446 "2007-07-10T07:51:02Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![wanchope](https://avatars.discourse-cdn.com/v4/letter/w/ecae2f/32.png) [@wanchope](https://forum.sierrawireless.com/u/wanchope)\ **Post date:** [July 10, 2007, 7:51am UTC](https://forum.sierrawireless.com/t/new-q24-plus-module/1446/1 "2007-07-10T07:51:02Z")
Hi, all, I just received the new Q24 plus eval module from the local vendor. I found all the AT# commands are disabled. When the following AT commands are sent, AT+WCFM=2, it returns +WCFM: 0006,0 ATi3 it returns 657-09gg.q24PL001 1954500 102706 18:44 AT+WCFM=5 it returns +WCFM:00000000 I read the post of [wavecom.com/modules/movie/sc … ommand+set](http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?t=1380&highlight=command+set) , seems like the module does not come with the IP stack. Am I right? I used Q2406B before, and it is working fine. AT#APNSERV, AT#UDPPORT etc. are the common commands needs to use. Is the new Q24 series still supporting AT# command? What do I need to do to make it work? Please advise. Wanchope ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [July 10, 2007, 8:43am UTC](https://forum.sierrawireless.com/t/new-q24-plus-module/1446/2 "2007-07-10T08:43:57Z")
> [@wanchope](#): > > I just received the new Q24 plus eval module from the local vendor … seems like the module does not come with the IP stack. Am I right? The Vendor should be able to answer that? ---
**Author:** ![colin-tfe](https://avatars.discourse-cdn.com/v4/letter/c/cdc98d/32.png) [@colin-tfe](https://forum.sierrawireless.com/u/colin-tfe)\ **Post date:** [July 10, 2007, 8:46am UTC](https://forum.sierrawireless.com/t/new-q24-plus-module/1446/3 "2007-07-10T08:46:17Z")
Hi ! read this post : [wavecom.com/modules/movie/sc … php?t=1500](http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?t=1500) Firmware 6.57 cannot use eDLib / eDSoft, but has the WIP internet plugin. The command related to WIP are (as far as i know) AT+WIP… (and not AT# anymore) Hope it helps ---
**Author:** ![wanchope](https://avatars.discourse-cdn.com/v4/letter/w/ecae2f/32.png) [@wanchope](https://forum.sierrawireless.com/u/wanchope)\ **Post date:** [July 10, 2007, 8:54am UTC](https://forum.sierrawireless.com/t/new-q24-plus-module/1446/4 "2007-07-10T08:54:56Z")
Thanks for your quick reply, man. May I know where I can find the WIP command set. I do not want to rely on the local rep as they are not so technical. ---
**Author:** ![Wallace](https://avatars.discourse-cdn.com/v4/letter/w/b4bc9f/32.png) [@Wallace](https://forum.sierrawireless.com/u/Wallace)\ **Post date:** [July 10, 2007, 1:35pm UTC](https://forum.sierrawireless.com/t/new-q24-plus-module/1446/5 "2007-07-10T13:35:52Z")
so easy to find… 😃 [http://www.google.com/search?num=20&h&q=wipsoft+filetype%3Apdf&lr=](http://www.google.com/search?num=20&h&q=wipsoft+filetype%3Apdf&lr=) ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [July 10, 2007, 3:34pm UTC](https://forum.sierrawireless.com/t/new-q24-plus-module/1446/6 "2007-07-10T15:34:04Z")
> [@Wallace](#): > > so easy to find… But strange how there’s no hits on the Wavecom site… 😮 ---
**Author:** ![wanchope](https://avatars.discourse-cdn.com/v4/letter/w/ecae2f/32.png) [@wanchope](https://forum.sierrawireless.com/u/wanchope)\ **Post date:** [July 11, 2007, 1:36am UTC](https://forum.sierrawireless.com/t/new-q24-plus-module/1446/7 "2007-07-11T01:36:11Z")
Thanks, Wallace. How to confirm whether the Wipsoft already built in? Any AT command to do so? My AT+WOPEN=2 response is +WOPEN:2,“AT v03.12” Any hint? regards Wanchope ---
**Author:** ![colin-tfe](https://avatars.discourse-cdn.com/v4/letter/c/cdc98d/32.png) [@colin-tfe](https://forum.sierrawireless.com/u/colin-tfe)\ **Post date:** [July 11, 2007, 7:01am UTC](https://forum.sierrawireless.com/t/new-q24-plus-module/1446/8 "2007-07-11T07:01:57Z")
As i told you in post [wavecom.com/modules/movie/sc … php?t=1500](http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?t=1500), if wopen=2 answers +WOPEN:2,“AT v03.12”, it means that there is no application loaded in the module. The format of +WOPEN:2 answer is : +WOPEN:2,“Open AT compatible version with module”,“Open AT version of the loaded application” So if there was an application in your module, you’d have something like : +WOPEN:2,“AT v03.12”,“AT v03.12” See pdf document : AT Commands Interface Guide (Specific AT commands section)