# Network time reading using SL8090 AT command **URL:** \ **Category:** Legacy AirPrime modules\ **Created:** [September 11, 2013, 7:14am UTC](https://forum.sierrawireless.com/t/network-time-reading-using-sl8090-at-command/6724 "2013-09-11T07:14:53Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![sukhdeep](https://avatars.discourse-cdn.com/v4/letter/s/4bbf92/32.png) [@sukhdeep](https://forum.sierrawireless.com/u/sukhdeep)\ **Post date:** [September 11, 2013, 7:14am UTC](https://forum.sierrawireless.com/t/network-time-reading-using-sl8090-at-command/6724/1 "2013-09-11T07:14:53Z")
Hi, How can i read network time using SL8090 AT command? ---
**Author:** ![ado1](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@ado1](https://forum.sierrawireless.com/u/ado1)\ **Post date:** [September 11, 2013, 7:22am UTC](https://forum.sierrawireless.com/t/network-time-reading-using-sl8090-at-command/6724/2 "2013-09-11T07:22:39Z")
Hi, There’s a +WIND indication (+WIND: 15,…) which displays the NITZ information including the network time. ---
**Author:** ![sukhdeep](https://avatars.discourse-cdn.com/v4/letter/s/4bbf92/32.png) [@sukhdeep](https://forum.sierrawireless.com/u/sukhdeep)\ **Post date:** [September 11, 2013, 7:32am UTC](https://forum.sierrawireless.com/t/network-time-reading-using-sl8090-at-command/6724/3 "2013-09-11T07:32:01Z")
I tried AT+WIND AT+WIND? AT+WIND=? I am getting ERROR. ---
**Author:** ![ado1](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@ado1](https://forum.sierrawireless.com/u/ado1)\ **Post date:** [September 11, 2013, 7:41am UTC](https://forum.sierrawireless.com/t/network-time-reading-using-sl8090-at-command/6724/4 "2013-09-11T07:41:08Z")
Please refer to AT commands userguide. +WIND indication are activated with AT+WIND= : indication levels 8192 (bit13) activate NITZ indication So try this: AT+WIND=8192 When the NITZ is received by the module (usually just after the module is camped to the network), a +WIND: 15,… information is sent on serial ports. ---
**Author:** ![sukhdeep](https://avatars.discourse-cdn.com/v4/letter/s/4bbf92/32.png) [@sukhdeep](https://forum.sierrawireless.com/u/sukhdeep)\ **Post date:** [September 11, 2013, 7:54am UTC](https://forum.sierrawireless.com/t/network-time-reading-using-sl8090-at-command/6724/5 "2013-09-11T07:54:49Z")
tried AT+WIND=8192, still i am getting error. I searched all pdf downloaded for SL8090 module. In one of pdf “Product Technical Specification and Customer Design Guidelines for AirPrime SL809x-Rev4.2” I found the name “Network Identity and Time Zone (NITZ) as broadcast by network” only. I have not seen any AT command related with network time update. ---
**Author:** ![ado1](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@ado1](https://forum.sierrawireless.com/u/ado1)\ **Post date:** [September 11, 2013, 8:00am UTC](https://forum.sierrawireless.com/t/network-time-reading-using-sl8090-at-command/6724/6 "2013-09-11T08:00:36Z")
Sorry, it is not the right plateform, this command is not available on SL8090, but on SL808xT. Sorry for the misunderstanding. ---
**Author:** ![sukhdeep](https://avatars.discourse-cdn.com/v4/letter/s/4bbf92/32.png) [@sukhdeep](https://forum.sierrawireless.com/u/sukhdeep)\ **Post date:** [September 11, 2013, 8:03am UTC](https://forum.sierrawireless.com/t/network-time-reading-using-sl8090-at-command/6724/7 "2013-09-11T08:03:56Z")
Thanks for your support. Is there any AT command to get network time?