# Need Product Advice on Wavecom **URL:** \ **Category:** Legacy FX/FXT series\ **Created:** [October 11, 2009, 7:53pm UTC](https://forum.sierrawireless.com/t/need-product-advice-on-wavecom/3730 "2009-10-11T19:53:44Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![garrywh1](https://avatars.discourse-cdn.com/v4/letter/g/ec9cab/32.png) [@garrywh1](https://forum.sierrawireless.com/u/garrywh1)\ **Post date:** [October 11, 2009, 7:53pm UTC](https://forum.sierrawireless.com/t/need-product-advice-on-wavecom/3730/1 "2009-10-11T19:53:44Z")
Hello, I am new to this forum, but very familiar with programming C. I have a pretty high level question. I’m not sure which wavecom device I need to purchase. I am leaning towards the Fastrack Supreme based on limited knowledge. I need to build an application that can record a keypress (5V signal) from a micro switch. I would also like to be also able to send a signal 5V signal out that could be read by another device. Can the Fastrack supreme be used in this type of an application? If not, are there other devices I should be considering? I would also like to buy the Fastrack Supreme developers kit. I live in Canada. Anyone know where I can buy one and what the approximate price is? Thank you in advance, Garry ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [October 11, 2009, 9:01pm UTC](https://forum.sierrawireless.com/t/need-product-advice-on-wavecom/3730/2 "2009-10-11T21:01:07Z")
Find your local distrobutor here: [wavecom.com/modules/movie/scenes/locator/](http://www.wavecom.com/modules/movie/scenes/locator/) Then discuss your requirement with the distributor! No, none of the wavecom devices provies a direct 5V interface. ---
**Author:** ![garrywh1](https://avatars.discourse-cdn.com/v4/letter/g/ec9cab/32.png) [@garrywh1](https://forum.sierrawireless.com/u/garrywh1)\ **Post date:** [October 13, 2009, 5:14pm UTC](https://forum.sierrawireless.com/t/need-product-advice-on-wavecom/3730/3 "2009-10-13T17:14:56Z")
> [@awneil](#): > > Find your local distrobutor here: [wavecom.com/modules/movie/scenes/locator/](http://www.wavecom.com/modules/movie/scenes/locator/) > > Then discuss your requirement with the distributor! > > No, none of the wavecom devices provies a direct 5V interface. Thank you for your reply awneil. I contacted my local distributor and they recommended the Fastrack Supreme with the IESM Daughter Card. Where do I go to download the Open AT software? I am a member of this forum (garrywh1), but when I try to login to the Wavecom site with my forum user/password, it brings me to a page “Ho do I get a developer profile” . It then suggested I upgrade to a developer account, but when I do this, it says this user/login already exists. I read that there is an Archive link where I can download the software and development manual. Can anyone here point me in the right direction so I can start looking at examples (sample code) for my project? Thanks in advance, Garry ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [October 13, 2009, 6:00pm UTC](https://forum.sierrawireless.com/t/need-product-advice-on-wavecom/3730/4 "2009-10-13T18:00:39Z")
Yes, the “developer” login is separate from the “forum” login. There is a ‘Contact us’ link at the bottom of the developer site - use that for help with your login. If you can, I recommend that you get your distributor to come to you to demonstrate the stuff ---
**Author:** ![JasonDiplomat](https://avatars.discourse-cdn.com/v4/letter/j/71e660/32.png) [@JasonDiplomat](https://forum.sierrawireless.com/u/JasonDiplomat)\ **Post date:** [October 21, 2009, 2:14pm UTC](https://forum.sierrawireless.com/t/need-product-advice-on-wavecom/3730/5 "2009-10-21T14:14:49Z")
> [@garrywh1](#): > > I am a member of this forum (garrywh1), but when I try to login to the Wavecom site with my forum user/password, it brings me to a page “Ho do I get a developer profile” . It then suggested I upgrade to a developer account, but when I do this, it says this user/login already exists. I’ve had the same issue - I’ve tried contacting the webmaster to no avail.