# Modbus does not work with Enegiya board

**URL:** <https://forum.sierrawireless.com/t/modbus-does-not-work-with-enegiya-board/24003>\
**Category:** Octave\
**Tags:** debug, iot-cards, modbus\
**Created:** [June 15, 2021, 11:39am UTC](https://forum.sierrawireless.com/t/modbus-does-not-work-with-enegiya-board/24003 "2021-06-15T11:39:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![r0795090](https://avatars.discourse-cdn.com/v4/letter/r/90db22/32.png) [@r0795090](https://forum.sierrawireless.com/u/r0795090)\
**Post date:** [June 15, 2021, 11:39am UTC](https://forum.sierrawireless.com/t/modbus-does-not-work-with-enegiya-board/24003/1 "2021-06-15T11:39:41Z")

</div>

Hi,  
I’m trying to read modbus from a device which also has a RS485 connector. When i try to install the energiya app there are no error’s. When i look into octave there is no energiya resource:

 ![afbeelding](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/7/7d38272592fff2b09e71c2abc89cf5bf15cfa342.png)

When i go into my Mangoh Yellow using putty and run “app status” i see the app "Energiya "  
 ![afbeelding](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/d/de3eba59f8b6318640356f1de05c7c801d820c23.png)

I configured my modbus in the “services” tab.

 ![afbeelding](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/1/1ecd5b7f9f180841fa2e99673f6974ad1ad82963.png)

After that wen i’m going to look into my resources. There is no data from the modbus.  
 ![afbeelding](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/f/f45266fb65a687edd972c51cfc7a10d09742d412.png)

**Where is the problem? And how can i fix it?**  
Thank you in advanced!

---

<div class="post-metadata">

**Author:** ![amons](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/amons/32/4887_2.png) [@amons](https://forum.sierrawireless.com/u/amons)\
**Post date:** [June 28, 2021, 5:04pm UTC](https://forum.sierrawireless.com/t/modbus-does-not-work-with-enegiya-board/24003/2 "2021-06-28T17:04:23Z")

</div>

> [@r0795090](#):
>
> which also has a RS485 connector. When i try to install the energiya app there are no error’s. When i look into octave there is no

HI,

Which device are you using ?

WIth the Energiya RS-485 card you don’t need to configure the Energiya service in Octave as the card handles protocol 485 to UART conversion without any need for a specific configuration

I would first recommend you to set a timer different than 0 for the default modbus polling timer (Set 10 for instance in your case). Are the adresses starting at 0 on your modbus device ? Some devices have an offset where 1st register starts at 1

A.
