# Migrating from HL8548 to HL7650/7688/7800

**URL:** <https://forum.sierrawireless.com/t/migrating-from-hl8548-to-hl7650-7688-7800/16848>\
**Category:** Legacy HL Series\
**Created:** [July 3, 2019, 1:23am UTC](https://forum.sierrawireless.com/t/migrating-from-hl8548-to-hl7650-7688-7800/16848 "2019-07-03T01:23:00Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![DKV](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/dkv/32/4538_2.png) [@DKV](https://forum.sierrawireless.com/u/DKV)\
**Post date:** [August 1, 2019, 4:31am UTC](https://forum.sierrawireless.com/t/migrating-from-hl8548-to-hl7650-7688-7800/16848/7 "2019-08-01T04:31:51Z")

</div>

Turns out this was the issue:

> [@USB not detecting HL7688 after firmware update](https://forum.sierrawireless.com/t/usb-not-detecting-hl7688-after-firmware-update/16523/8):
>
> Hello Klin2, I was not able to update the software as the model is different. I am working on HL7688 not HL75xx. I have attached the screenshot of the error message for your information. Is there a fix for the HL7688 version which I could test to see if the problem is fixed? [fw\_download\_error] I would like to ask you, is there a workaround with the existing build A2.15.1 which we could perform to fix the problem? Thanks Harish K

WIth A2.15.1, to workaround this issue, please make sure not pull low for GPIO\_1 and GPIO\_5 during boot up.

We were pulling GPIO5 low by default - all good now.  
Cheers,  
Dave

---

_[View the full topic](https://forum.sierrawireless.com/t/migrating-from-hl8548-to-hl7650-7688-7800/16848)._
