# MC8704 - how to make a voice call

**URL:** <https://forum.sierrawireless.com/t/mc8704-how-to-make-a-voice-call/7608>\
**Category:** MC/EM Series\
**Created:** [December 3, 2014, 9:10pm UTC](https://forum.sierrawireless.com/t/mc8704-how-to-make-a-voice-call/7608 "2014-12-03T21:10:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![teslabox](https://avatars.discourse-cdn.com/v4/letter/t/ecccb3/32.png) [@teslabox](https://forum.sierrawireless.com/u/teslabox)\
**Post date:** [December 3, 2014, 9:10pm UTC](https://forum.sierrawireless.com/t/mc8704-how-to-make-a-voice-call/7608/1 "2014-12-03T21:10:29Z")

</div>

Hi Everyone!

I have a Sierra Wireless MC8704 modem connected to my PC (with Windows 7 Pro 64-bits) via miniPCIe.  
I installed drivers and AriPrime Watcher (software for it). I also upgraded firmware from 09/19/11 T2\_0\_2\_1BAP to 03/15/13 T3\_0\_4\_1AP (both type APPL820A) using Binary Update Tool - R11.2.1105.0. I inserted activated SIM card into SIM holder in my laptop (DELL PRECISION M6600) and I can only send and receive SMS and read the GPS position (at home it does not work so good; rating 3/10).  
How can I make a voice call/phone call from my MC8704?

I will by grateful very much for help.  
Jacob

---

<div class="post-metadata">

**Author:** ![Rex\_alex](https://avatars.discourse-cdn.com/v4/letter/r/73ab20/32.png) [@Rex\_alex](https://forum.sierrawireless.com/u/Rex_alex)\
**Post date:** [December 10, 2014, 10:09am UTC](https://forum.sierrawireless.com/t/mc8704-how-to-make-a-voice-call/7608/2 "2014-12-10T10:09:18Z")

</div>

hi Jacob,

You can do a call through hyper terminal. Before call check the signal strength using AT+CSQ command and check the SIM registration status using AT+CREG?  
Also you have to enable voice support by providing AT!CUSTOM=”ISVOICEN”, . Please check with the Extended AT command guide.  
Then go with the voice call ATD

thanks,  
Rex
