# MC7710 force specific band?

**URL:** <https://forum.sierrawireless.com/t/mc7710-force-specific-band/8835>\
**Category:** MC/EM Series\
**Created:** [October 7, 2016, 1:46pm UTC](https://forum.sierrawireless.com/t/mc7710-force-specific-band/8835 "2016-10-07T13:46:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kamilserwisant](https://avatars.discourse-cdn.com/v4/letter/k/ed655f/32.png) [@kamilserwisant](https://forum.sierrawireless.com/u/kamilserwisant)\
**Post date:** [October 7, 2016, 1:46pm UTC](https://forum.sierrawireless.com/t/mc7710-force-specific-band/8835/1 "2016-10-07T13:46:29Z")

</div>

Hello

I have a MC7710 card and for some reason it defaults to band 20 which is not supported in my counrty and while it works it is very problematic (slow transfer and a lot of disconnects). Default band in my country is band 3 (to which the MC7710 sometimes connects but quickly switches to band 20), can I send an AT! command that would force MC7710 to only use that band?

I have tried to send a command like this:

at!band=10,”LTE B3”,0,4

unfortunately nothing has changed

Please help.

---

<div class="post-metadata">

**Author:** ![zainol69](https://avatars.discourse-cdn.com/v4/letter/z/c77e96/32.png) [@zainol69](https://forum.sierrawireless.com/u/zainol69)\
**Post date:** [October 8, 2016, 5:45am UTC](https://forum.sierrawireless.com/t/mc7710-force-specific-band/8835/2 "2016-10-08T05:45:28Z")

</div>

Hi Mr. Kamil,

Have a nice day. May I know which country you’re ? I’ve installed MC7304 on Lenovo X220T running Windows 7 Pro 64 bit and using SIM Card from one of telecommunication service provider where their “current” band is LTE B3. Not sure either your card does requires a specific SIM Card from registered service provider. Believe MC7710 is already “EOL” and recommended to replace with MC7304. Please do check with below commands.

at!entercnd=“A710”  
at!band?  
at!band=?  
at!antsel?  
at!antsel=?

Try set based on antenna as below:

at!antsel=3,0,0,1

do check current antenna setup:

at!antsel?

Regards,

---

<div class="post-metadata">

**Author:** ![vve](https://avatars.discourse-cdn.com/v4/letter/v/51bf81/32.png) [@vve](https://forum.sierrawireless.com/u/vve)\
**Post date:** [October 8, 2016, 7:55pm UTC](https://forum.sierrawireless.com/t/mc7710-force-specific-band/8835/3 "2016-10-08T19:55:51Z")

</div>

> [@kamilserwisant](#):
>
> I have tried to send a command like this:
> 
> at!band=10,”LTE B3”,0,4
> 
> unfortunately nothing has changed

Now you should simply activate, select this new “band combo”:

at!band=10
