# MC7455 running with OpenWRT on Raspebbry Pi

**URL:** <https://forum.sierrawireless.com/t/mc7455-running-with-openwrt-on-raspebbry-pi/14941>\
**Category:** MC/EM Series\
**Created:** [January 8, 2019, 5:58pm UTC](https://forum.sierrawireless.com/t/mc7455-running-with-openwrt-on-raspebbry-pi/14941 "2019-01-08T17:58:13Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![afnan](https://avatars.discourse-cdn.com/v4/letter/a/b4bc9f/32.png) [@afnan](https://forum.sierrawireless.com/u/afnan)\
**Post date:** [January 9, 2019, 5:07pm UTC](https://forum.sierrawireless.com/t/mc7455-running-with-openwrt-on-raspebbry-pi/14941/5 "2019-01-09T17:07:48Z")

</div>

Thanks Jon,

I’m no able to see any ttyUSB under /dev but I do see cdc-wdm0 and cdc-wdm1. If I try to use cdc-wdm0 , minicom says that the device is offline. I am however able to use the uqmi commands to get the signal info and data status.

The other issue I am having is to make the Gobi files as you had suggested. I believe OpenWRT cannot perform it. For the drivers I had gone through the thread below but seems like I do not have qmicli on my OpenWRT.

> [@How to Install Sierra firmware within OpenWRT CLI?](https://forum.sierrawireless.com/t/how-to-install-sierra-firmware-within-openwrt-cli/9402/5):
>
> And a real example upgrading a EM7455 running in MBIM mode (with QMI over MBIM) in an OpenWRT based system: # qmicli -d /dev/cdc-wdm0 -p --dms-set-firmware-preference="02.24.03.00,002.023\_000,ATT" # qmicli -d /dev/cdc-wdm0 -p --dms-set-operating-mode=offline # qmicli -d /dev/cdc-wdm0 -p --dms-set-operating-mode=reset (wait for single ttyUSB0 to appear) # qmi-firmware-update -t /dev/ttyUSB0 --update-qdl \ /tmp/firmware-EM7455/SWI9X30C\_02.24.03.00.cwe \ /tmp/firmware-EM7455/SWI9X30C\_…

Sorry, I am a bit lost here right now. Thanks in advance for any help I can get.

---

_[View the full topic](https://forum.sierrawireless.com/t/mc7455-running-with-openwrt-on-raspebbry-pi/14941)._
