# MC7430 LTE mode continuous transmission **URL:** \ **Category:** IoT Modules\ **Created:** [September 4, 2024, 5:12am UTC](https://forum.sierrawireless.com/t/mc7430-lte-mode-continuous-transmission/32922 "2024-09-04T05:12:35Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\ **Post date:** [September 4, 2024, 5:14am UTC](https://forum.sierrawireless.com/t/mc7430-lte-mode-continuous-transmission/32922/2 "2024-09-04T05:14:28Z")
does this help? > [@EM7455 - Start continuous transmission (test mode) for CE certification (module integration)](https://forum.sierrawireless.com/t/em7455-start-continuous-transmission-test-mode-for-ce-certification-module-integration/23751): > > Hello, I’m trying to research relevant steps to get into a module test mode for EM7455 for LTE module integration (propably similar to other modules of that series), because of a CE certification procedure. In discussion with our measurement laboratory service partner they require that the module needs to enter a continuous transmission testing mode to reach EMC requirements. The AT commands documentation describes a test mode section with options like: enter a factory test mode (AT!DAFTMACT… --- _[View the full topic](https://forum.sierrawireless.com/t/mc7430-lte-mode-continuous-transmission/32922)._