# MC7354 - GPSOneXtra and Windows 8.1 - Updated

**URL:** <https://forum.sierrawireless.com/t/mc7354-gpsonextra-and-windows-8-1-updated/7377>\
**Category:** MC/EM Series\
**Created:** [August 9, 2014, 2:31pm UTC](https://forum.sierrawireless.com/t/mc7354-gpsonextra-and-windows-8-1-updated/7377 "2014-08-09T14:31:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jpzaremba](https://avatars.discourse-cdn.com/v4/letter/j/dfb087/32.png) [@jpzaremba](https://forum.sierrawireless.com/u/jpzaremba)\
**Post date:** [August 9, 2014, 2:31pm UTC](https://forum.sierrawireless.com/t/mc7354-gpsonextra-and-windows-8-1-updated/7377/1 "2014-08-09T14:31:54Z")

</div>

I am being challenged with getting GPS Data to be consumed by apps operating in Windows 8.1 Update 1. I have an MC7354 installed in a Dell Latitude 7240.

In Windows 7 on the same laptop - I was able to get GPSOneXtra working by opening a Putty session to the Sierra Wireless Modem COM4 and issuing an AT!GPSXTRAINITDNLD command. While I can still issue the command in Win8 and get an OK I noticed that GPS Monitor was showing no satellites obtained and could not fix a position

So while I could connect LTE Sessions via SkyLight or Win 8.1 native - the GPS Monitor app showed no satellites found and could not establish a GPS Fix Position. I opened a second Putty session to the NMEA Port (COM3) and saw GPS Output. Immediately the GPS monitor showed 14 Satellites found and was able to fix a position.

However - any GPS App - i.e Bing Maps, Google Maps or Nokia Here Maps - could not consume any of the GPS Data. Also as soon as I close the Putty session to the NMEA Port - all updates in GPS Monitor stop.

The Sierra Wireless Location Sensor does show up in Device Manager and is working properly. The Windows Location Provider is also there and I have tried various configurations of enabling or disabling the Windows service - but to no avail.

So any insights into why Windows 8.1 is not seeing or consuming data from the NMEA port would be appreciated. I have seen nothing in any of the readme or other files that have provided any guidance.

thx

thx

---

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://forum.sierrawireless.com/u/lotam)\
**Post date:** [August 11, 2014, 10:05am UTC](https://forum.sierrawireless.com/t/mc7354-gpsonextra-and-windows-8-1-updated/7377/2 "2014-08-11T10:05:50Z")

</div>

Which driver version you are using?

---

<div class="post-metadata">

**Author:** ![jpzaremba](https://avatars.discourse-cdn.com/v4/letter/j/dfb087/32.png) [@jpzaremba](https://forum.sierrawireless.com/u/jpzaremba)\
**Post date:** [August 11, 2014, 5:45pm UTC](https://forum.sierrawireless.com/t/mc7354-gpsonextra-and-windows-8-1-updated/7377/3 "2014-08-11T17:45:50Z")

</div>

I am using the Generic Driver Setup Build 4110 posted on the SW site.

Specific Driver versions are:

Sierra Wireless WWAN Modem (COM4) = 13.12.1005.25  
Sierra Wireless NMEA COM Port (COM3) = 13.12.1005.25  
Sierra Wireless DM Port COM Port COM5 = 13.12.1005.25

All above dated 12/16/2013

Sierra Wireless Location Sensor= 14.5.1030.8 dated 5/1/2014
