# MC7304 self-resets after connect and pushing some data over it

**URL:** <https://forum.sierrawireless.com/t/mc7304-self-resets-after-connect-and-pushing-some-data-over-it/16182>\
**Category:** MC/EM Series\
**Created:** [April 24, 2019, 1:45pm UTC](https://forum.sierrawireless.com/t/mc7304-self-resets-after-connect-and-pushing-some-data-over-it/16182 "2019-04-24T13:45:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bhv](https://avatars.discourse-cdn.com/v4/letter/b/d07c76/32.png) [@bhv](https://forum.sierrawireless.com/u/bhv)\
**Post date:** [April 24, 2019, 1:45pm UTC](https://forum.sierrawireless.com/t/mc7304-self-resets-after-connect-and-pushing-some-data-over-it/16182/1 "2019-04-24T13:45:10Z")

</div>

I am using 4x MC7304 (Firmware revision: SWI9X15C\_05.05.61.00 r28313 CARMD-EV-FRMWR1 2015/05/21 23:40:18) installed in Vecow IVH-9008, using Debian Stretch (kernel 4.9.78) and controlled by ModemManager (1.6.4)

One modem self-resets every time after connecting and pushing some data over it (pings).  
It is 100% reproducible. In the kernel logs I see the modem disconnects from USB bus only, none suspicious errors.

Is someone else seeing this problem?

---

<div class="post-metadata">

**Author:** ![jleitner](https://avatars.discourse-cdn.com/v4/letter/j/a9adbd/32.png) [@jleitner](https://forum.sierrawireless.com/u/jleitner)\
**Post date:** [April 24, 2019, 3:48pm UTC](https://forum.sierrawireless.com/t/mc7304-self-resets-after-connect-and-pushing-some-data-over-it/16182/2 "2019-04-24T15:48:41Z")

</div>

Hello,

What carrier/network operator are you on?  
Please load the latest firmware 5.5.78.0 if not on vodaphone.

Modemmanager might need to be blacklisted is using the Linux QMI SDK APIs.  
Are you using the SDK or other QMI APIs?

Jon