# M1306B Resets every 10 seconds, even without running appl

**URL:** <https://forum.sierrawireless.com/t/m1306b-resets-every-10-seconds-even-without-running-appl/1360>\
**Category:** Legacy AirPrime modules\
**Created:** [June 5, 2007, 2:42am UTC](https://forum.sierrawireless.com/t/m1306b-resets-every-10-seconds-even-without-running-appl/1360 "2007-06-05T02:42:32Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![sbero](https://avatars.discourse-cdn.com/v4/letter/s/b487fb/32.png) [@sbero](https://forum.sierrawireless.com/u/sbero)\
**Post date:** [June 5, 2007, 2:42am UTC](https://forum.sierrawireless.com/t/m1306b-resets-every-10-seconds-even-without-running-appl/1360/1 "2007-06-05T02:42:32Z")

</div>

Device restarts all the time, even if no application is started.  
That happens on device after I use connection to GPRS for a first time.  
So I close application with AT+WOPEN=0  
But device still resets all the time. +WIND: 13 means reset.

This is response that I get:

+WIND: 13

+WIND: 1

+WIND: 7

+WIND: 16

+WIND: 13

+WIND: 1

+WIND: 7

+WIND: 16

I don’t know what to do.  
I tested 2 sim cards. Both are working fine on other cell phones.  
SIM cards are correctly inserted.  
For now I did that on 3 devices and all of them resets every 10 seconds.  
On 2 of them I tried to restore factory settings with AT+F but this didn’t help.

Device works fine without SIM card!

Does anybody know what might be the problem?

---

<div class="post-metadata">

**Author:** ![jan](https://avatars.discourse-cdn.com/v4/letter/j/ce7236/32.png) [@jan](https://forum.sierrawireless.com/u/jan)\
**Post date:** [June 5, 2007, 7:21am UTC](https://forum.sierrawireless.com/t/m1306b-resets-every-10-seconds-even-without-running-appl/1360/2 "2007-06-05T07:21:00Z")

</div>

see also: [http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?t=1411](http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?t=1411)

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [June 5, 2007, 7:40am UTC](https://forum.sierrawireless.com/t/m1306b-resets-every-10-seconds-even-without-running-appl/1360/3 "2007-06-05T07:40:02Z")

</div>

The question is about a Fastrack M1306B; it is double-posted, yet neither post is in the Fastrack forum! 😒

---

<div class="post-metadata">

**Author:** ![sbero](https://avatars.discourse-cdn.com/v4/letter/s/b487fb/32.png) [@sbero](https://forum.sierrawireless.com/u/sbero)\
**Post date:** [June 5, 2007, 12:27pm UTC](https://forum.sierrawireless.com/t/m1306b-resets-every-10-seconds-even-without-running-appl/1360/4 "2007-06-05T12:27:51Z")

</div>

Now I’m getting all the time following messages:

+WIND: 3

+WIND: 1

+WIND: 3

+WIND: 1

+WIND: 3

+WIND: 1

+WIND: 3

+WIND: 1

Does anybody know what might restart device every 10 seconds?  
It’s a huge problem because now I cannot use any of these devices.

Chipset in M1306B is (ATI3 command response):  
655\_09gg.Q2406B 2015268 111705 17:01

OK
