# Lots of missing topics!

**URL:** <https://forum.sierrawireless.com/t/lots-of-missing-topics/4726>\
**Category:** Forum and Source related topics\
**Created:** [November 2, 2010, 5:13pm UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726 "2010-11-02T17:13:50Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [November 2, 2010, 5:13pm UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/1 "2010-11-02T17:13:50Z")

</div>

If I search for “scope power”, I get the following result:

 ![](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/e/e00a27c30fa218e8661e0e5ea9d28d6251275fbc.gif)  

The four links are:

> [@CPU Hangs](https://forum.sierrawireless.com/t/cpu-hangs/3818/2):
>
> A what? Power supply problems can certainly cause some very “interesting” and obscure effects! Have you looked very carefully at the supply - very close to the module’s pins? Get your scope to trigger on voltage droops. Poor grounding of the can legs can also cause some very “interesting” and obscure effects…

> [@Regarding registering to the network](https://forum.sierrawireless.com/t/regarding-registering-to-the-network/2645/5):
>
> The power supply i am using 1s 3.8V/3A and the same PCB board is working fine when used in india.

> [@Regarding registering to the network](https://forum.sierrawireless.com/t/regarding-registering-to-the-network/2645/3):
>
> Check your power supplies! After start-up, registering to the network is the first thing that actually requires the module to transmit. If your power supplies are not quite right, everything can seem fine up to that point - but the real test is whether the supplies are man enough for transmitting. Get your scope on the module’s supply pin, and look carefully - especially during the Tx bursts…

> [@Buffer Capacitance](https://forum.sierrawireless.com/t/buffer-capacitance/301/3):
>
> Hi, The ESR of an healthy LiIon battery is very low. The most important things to check are: The protection circuit on the cell. It uses a MOSFET and on cheap battery packs can easily contribute 50mOhm or more ESR. If at all possible use a battery pack without a protection circuit. But only if the battery is not user accessible, and if regulations allow it. Battery connector/wires. Can contribute significant ESR. PCB layout. Often overlooked, but narrow tracks and via’s in the ro…

But only the first works; the other 3 all go to a redirect, and then a page saying, “The requested topic does not exist”.

 ![](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/2/222c83ad0b5b58447cad3b46cb06bac88c5b90b9.gif)  

Very many of the links in the FAQ/Wiki thread are affected by this: [FAQ forum/wiki?](https://forum.sierrawireless.com/t/faq-forum-wiki/3491/1) - thus greatly reducing its usefulness, and the usefulness of the rest of the forum!

😠

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [November 2, 2010, 5:17pm UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/2 "2010-11-02T17:17:06Z")

</div>

> [@awneil](#):
>
> greatly reducing its usefulness, and the usefulness of the rest of the forum!

eg, see: [Lots of missing topics!](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/1)

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [November 14, 2010, 7:29am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/3 "2010-11-14T07:29:15Z")

</div>

More examples: [https://forum.sierrawireless.com/t/daft-question-about-multiplexing-of-debug-and-serial-data/4741/2](https://forum.sierrawireless.com/t/daft-question-about-multiplexing-of-debug-and-serial-data/4741/2)

---

<div class="post-metadata">

**Author:** ![Moderator1](https://avatars.discourse-cdn.com/v4/letter/m/9fc348/32.png) [@Moderator1](https://forum.sierrawireless.com/u/Moderator1)\
**Post date:** [November 17, 2010, 9:44am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/4 "2010-11-17T09:44:38Z")

</div>

Hi  
The work to resolve this issue is already in progress.It will be resolved soon.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [November 17, 2010, 10:51am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/5 "2010-11-17T10:51:35Z")

</div>

Excellent!

😃

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [November 27, 2010, 8:41pm UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/6 "2010-11-27T20:41:56Z")

</div>

Any update on this?

eg, the “cake” search mentioned in this post is still broken:

> [@Daft question about multiplexing of debug and serial data](https://forum.sierrawireless.com/t/daft-question-about-multiplexing-of-debug-and-serial-data/4741/3):
>
> I believe they use escape characters - around number 223 or thereabouts. I only know this since I used codes around there for delimiting unsolicited notifications and found the shell got a bit upset.

> [@awneil](#):
>
> I have made some posts in the past, but SiWi seem to have lost them! 😠
> 
> eg, If you search for “cake”, the results will include a post titled “Have your cake, and eat it!” but, if you click the link, it will say, “The requested topic does not exist.”  
> And, if you click the linked topic within that post, it just goes to the forum index.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [December 9, 2010, 7:30am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/7 "2010-12-09T07:30:44Z")

</div>

This seems to be getting worse - the entire FAQ/Wiki thread now seems to have disappeared!

😠

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [December 9, 2010, 11:18am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/8 "2010-12-09T11:18:50Z")

</div>

> [@awneil](#):
>
> the entire FAQ/Wiki thread now seems to have disappeared!

I take that back - it’s here: [FAQ forum/wiki?](https://forum.sierrawireless.com/t/faq-forum-wiki/3491/1)

😃

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [December 16, 2010, 1:28pm UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/9 "2010-12-16T13:28:54Z")

</div>

Still loads of broken links: [https://forum.sierrawireless.com/t/rtk-codes-documentation/4778/3](https://forum.sierrawireless.com/t/rtk-codes-documentation/4778/3)

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [January 5, 2011, 11:22am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/10 "2011-01-05T11:22:16Z")

</div>

It’s a new year, but the old problem persists: [https://forum.sierrawireless.com/t/new-features-complete-api/3305/15](https://forum.sierrawireless.com/t/new-features-complete-api/3305/15)

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [February 15, 2011, 8:20am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/11 "2011-02-15T08:20:57Z")

</div>

Did the “up gradation process” planned for 31st jan 2011 take place: ttps://forum.sierrawireless.com/viewtop … =56&t=5361❓

It doesn’t seem to have fixed anything. ☹

---

<div class="post-metadata">

**Author:** ![Sierra\_Wireless](https://avatars.discourse-cdn.com/v4/letter/s/edb3f5/32.png) [@Sierra\_Wireless](https://forum.sierrawireless.com/u/Sierra_Wireless)\
**Post date:** [February 24, 2011, 7:05pm UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/12 "2011-02-24T19:05:16Z")

</div>

> [@awneil](#):
>
> Did the “up gradation process” planned for 31st jan 2011 take place: ttps://forum.sierrawireless.com/viewtop … =56&t=5361❓
> 
> It doesn’t seem to have fixed anything. ☹

We have upgraded phpBB to the latest version (3.0.8 ) and migrated it to new servers. Now that it is in a more stable environment we’ve continued our investigation. I’ve found all of the missing posts and topics in the database, so no data has been lost. It appears that the reason the topics/posts cannot be displayed is because the associated forum id ‘15’ is missing in the database. You can still find them in a search because the search function only searches the posts and topics tables and does not require the forums table.

I’m working on a solution which, if it works, will place all missing topics in a locked archive forum for read-only access. Unfortunately we have no way of knowing the details of this missing forum so we can’t recreate it completely.

–  
Clinton

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [February 24, 2011, 10:12pm UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/13 "2011-02-24T22:12:38Z")

</div>

> [@Sierra Wireless](#):
>
> It appears that the reason the topics/posts cannot be displayed is because the associated forum id ‘15’ is missing in the database.

Not long after the SiWi takeover, there was a lot of “restructuring” of the forum - a load of new sections were added and, not very long after, a lot were removed. And many were renamed

eg, there was briefly a “Known Bugs” section.

Is it possible that, with all this adding & removing of sections (“forums”?), these posts managed to get “disconnected”…?

---

<div class="post-metadata">

**Author:** ![Sierra\_Wireless](https://avatars.discourse-cdn.com/v4/letter/s/edb3f5/32.png) [@Sierra\_Wireless](https://forum.sierrawireless.com/u/Sierra_Wireless)\
**Post date:** [March 4, 2011, 1:34am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/14 "2011-03-04T01:34:36Z")

</div>

The fix has been implemented.

> [@awneil](#):
>
> Is it possible that, with all this adding & removing of sections (“forums”?), these posts managed to get “disconnected”…?

This is a possibility but we have no way of finding out for sure.

–  
Clinton

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [March 4, 2011, 7:00am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/15 "2011-03-04T07:00:25Z")

</div>

> [@Sierra Wireless](#):
>
> The fix has been implemented.

Execllent - I presume this is it: [viewforum.php?f=15](https://forum.sierrawireless.com/viewforum.php?f=15)❓

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [March 7, 2011, 8:58am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/16 "2011-03-07T08:58:15Z")

</div>

> [@Sierra Wireless](#):
>
> The fix has been implemented.

There are still missing topics; eg,

1. The Link in this post just goes to the HTTP 404 page:  
[Where is the 'Tools Manual' for M2M Studio? - #9 by daav](https://forum.sierrawireless.com/t/where-is-the-tools-manual-for-m2m-studio/3187/9)

2. The Link in this post just goes to the HTTP 404 page:  
[Where is the 'Tools Manual' for M2M Studio? - #9 by daav](https://forum.sierrawireless.com/t/where-is-the-tools-manual-for-m2m-studio/3187/9)

They are both links to the old forum, [wavecom.com/modules/movie/scenes/forums/](http://www.wavecom.com/modules/movie/scenes/forums/)

---

<div class="post-metadata">

**Author:** ![Sierra\_Wireless](https://avatars.discourse-cdn.com/v4/letter/s/edb3f5/32.png) [@Sierra\_Wireless](https://forum.sierrawireless.com/u/Sierra_Wireless)\
**Post date:** [March 9, 2011, 1:58am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/17 "2011-03-09T01:58:24Z")

</div>

> [@awneil](#):
>
> > [@Sierra Wireless](#):
> >
> > The fix has been implemented.
> 
> There are still missing topics; eg,
> 
> 1. The Link in this post just goes to the HTTP 404 page:  
> [Where is the 'Tools Manual' for M2M Studio? - #9 by daav](https://forum.sierrawireless.com/t/where-is-the-tools-manual-for-m2m-studio/3187/9)
> 
> 2. The Link in this post just goes to the HTTP 404 page:  
> [Where is the 'Tools Manual' for M2M Studio? - #9 by daav](https://forum.sierrawireless.com/t/where-is-the-tools-manual-for-m2m-studio/3187/9)
> 
> They are both links to the old forum, [wavecom.com/modules/movie/scenes/forums/](http://www.wavecom.com/modules/movie/scenes/forums/)

This was a separate issue which we have now dealt with. We implemented a URL Rewrite for the old domain which will send the request to the new forum URL and preserve the URI so that you aren’t just sent to the index page.

–  
Clinton

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [March 9, 2011, 7:26am UTC](https://forum.sierrawireless.com/t/lots-of-missing-topics/4726/18 "2011-03-09T07:26:37Z")

</div>

Yes - they are now working again.

Thanks.

😃
