# List of function? **URL:** \ **Category:** Open AT\ **Created:** [July 10, 2009, 3:28am UTC](https://forum.sierrawireless.com/t/list-of-function/3422 "2009-07-10T03:28:59Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![MLCarter](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@MLCarter](https://forum.sierrawireless.com/u/MLCarter)\ **Post date:** [July 10, 2009, 3:28am UTC](https://forum.sierrawireless.com/t/list-of-function/3422/1 "2009-07-10T03:28:59Z")
Another newbie question. What is the function to convert u16 to string? eg the correct solution for this counter++; s=c\_str(counter); adl\_atSendResponse ( ADL\_AT\_UNS,s); And more importantly is there a concise list of the available functions and their systax. I have looked in the User guide and this does not seem to cover the basic C functions ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [July 10, 2009, 6:46am UTC](https://forum.sierrawireless.com/t/list-of-function/3422/2 "2009-07-10T06:46:09Z")
> [@MLCarter](#): > > is there a concise list of the available functions and their systax. No, there isn’t - but it would be quite a useful thing to have, wouldn’t it? > [@](#): > > I have looked in the User guide and this does not seem to cover the basic C functions The standard ‘C’ functions work as defined in the ‘C’ standard. The list of these functions is in the section, “Basic Features” under “Standard C function set” - there you have the usual suspects like itoa and sprintf… There is also the “String Processing Function Set” - with some functions more directly targetted at handling the text of AT commands and responses. ---
**Author:** ![MLCarter](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@MLCarter](https://forum.sierrawireless.com/u/MLCarter)\ **Post date:** [July 10, 2009, 8:45am UTC](https://forum.sierrawireless.com/t/list-of-function/3422/3 "2009-07-10T08:45:29Z")
Thanks for that but which document is that in? Its not in the “ADL User guide for Open AT” that comes up from M2Mstudio. ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [July 10, 2009, 9:22am UTC](https://forum.sierrawireless.com/t/list-of-function/3422/4 "2009-07-10T09:22:41Z")
It has been in every version of the ADL User Guide that I’ve seen since 3.something - but I wouldn’t put it past Wavecom to have “lost” it in the latest release with M2MStudio… 😒 The one I’m specifically looking at at the moment came with the v2.12 SDK - which, I think, was the last to be separate from M2MStudio? > [@](#): > > ADL User Guide for Open AT® OS v6.11 > Reference: WM\_DEV\_OAT\_UGD\_080 > Revision: 004 > Date: October 14, 2008 > [@](#): > > Table of Contents > 1 Introduction…8 > 1.1 Important Remarks…8 > 1.2 References…8 > 1.3 Glossary…8 > 1.4 Abbreviations…9 > 2 Description…11 > 2.1 Software Architecture…11 > 2.2 ADL Limitations…12 > 2.3 Open AT® Memory Resources…12 > 2.4 Defined Compilation Flags…13 > 2.5 Inner AT Commands Configuration…14 > 2.6 Open AT® Specific AT Commands…14 > 2.7 Notes on Wavecom Firmware…15 > 2.8 Security…16 > 2.9 RTE limitations…17 > 3 API…18 > 3.1 Application Entry Points Interface…18 > 3.2 Basic Features…25 > [@](#): > > 3.2.3 Standard Library > 3.2.3.1 Standard C Function Set > The available standard APIs are defined below: > ascii \* wm\_strcpy ( ascii \* dst, ascii \* src ); > ascii \* wm\_strncpy ( ascii \* dst, ascii \* src, u32 n ); > ascii \* wm\_strcat ( ascii \* dst, ascii \* src ); > ascii \* wm\_strncat ( ascii \* dst, ascii \* src, u32 n ); > u32 wm\_strlen ( ascii \* str ); > s32 wm\_strcmp ( ascii \* s1, ascii \* s2 ); > s32 wm\_strncmp ( ascii \* s1, ascii \* s2, u32 n ); > s32 wm\_stricmp ( ascii \* s1, ascii \* s2 ); > s32 wm\_strnicmp ( ascii \* s1, ascii \* s2, u32 n ); > ascii \* wm\_memset ( ascii \* dst, ascii c, u32 n ); > ascii \* wm\_memcpy ( ascii \* dst, ascii \* src, u32 n ); > s32 wm\_memcmp ( ascii \* dst, ascii \* src, u32 n ); > ascii \* wm\_itoa ( s32 a, ascii \* szBuffer ); > s32 wm\_atoi ( ascii \* p ); > u8 wm\_sprintf ( ascii \* buffer, ascii \* fmt, … ); > [@](#): > > 3.2.3.2 String Processing Function Set > Some string processing functions are also available in this standard API. ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [July 10, 2009, 9:44am UTC](https://forum.sierrawireless.com/t/list-of-function/3422/5 "2009-07-10T09:44:55Z")
> [@awneil](#): > > It has been in every version of the ADL User Guide that I’ve seen since 3.something Actually, that’s not quite true. 😊 In the (early) 3.something days, it was just cross-referenced from the so-called “Basic i [/i]Development Guide” (now discontinued). ---
**Author:** ![MLCarter](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@MLCarter](https://forum.sierrawireless.com/u/MLCarter)\ **Post date:** [July 11, 2009, 5:32am UTC](https://forum.sierrawireless.com/t/list-of-function/3422/6 "2009-07-11T05:32:41Z")
😊😊 yes I do have that! Thanks