# List Destroy - R7.52

**URL:** <https://forum.sierrawireless.com/t/list-destroy-r7-52/6849>\
**Category:** Open AT\
**Created:** [November 14, 2013, 8:16am UTC](https://forum.sierrawireless.com/t/list-destroy-r7-52/6849 "2013-11-14T08:16:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JSurf](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jsurf/32/2243_2.png) [@JSurf](https://forum.sierrawireless.com/u/JSurf)\
**Post date:** [November 14, 2013, 8:16am UTC](https://forum.sierrawireless.com/t/list-destroy-r7-52/6849/1 "2013-11-14T08:16:14Z")

</div>

Hi All,

I am in the process of moving across to 7.52 and found that I receive an exception when wm\_lstDestroy is called.  
I have created a separate project to simply create a list and destroy it. In 7.47.4 it works fine, but when 7.52 is used it causes an exception reset.

```
wm_lst_t CellList;
adl_adGetCellList(&CellList);
wm_lstDestroy(CellList);

```

I’ve gone through the documentation on the new OS and firmware, but have not found anything that may cause this.  
Would appreciate any suggestions.

Thanks

---

<div class="post-metadata">

**Author:** ![Rex\_alex](https://avatars.discourse-cdn.com/v4/letter/r/73ab20/32.png) [@Rex\_alex](https://forum.sierrawireless.com/u/Rex_alex)\
**Post date:** [November 20, 2013, 10:09am UTC](https://forum.sierrawireless.com/t/list-destroy-r7-52/6849/2 "2013-11-20T10:09:06Z")

</div>

Hi,

Does the backtraces view tells anything?

---

<div class="post-metadata">

**Author:** ![JSurf](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jsurf/32/2243_2.png) [@JSurf](https://forum.sierrawireless.com/u/JSurf)\
**Post date:** [November 20, 2013, 11:11am UTC](https://forum.sierrawireless.com/t/list-destroy-r7-52/6849/3 "2013-11-20T11:11:09Z")

</div>

I’ve found the reason for the exception.  
There is a difference between how the adl\_adGetCellList api works in 7.47.4 and 7.52.  
In 7.52, adl\_adGetCellList doesn’t create a list if no A&D cell ids are in use and returns an error. Hence doing anything with that list causes an exception.  
In firmware 7.47.4 the function creates a list regardless and returns OK.  
I haven’t managed to find any documentation on these changes. If this change is documented, where can I find it?
