# LCD interface with wavecom module

**URL:** <https://forum.sierrawireless.com/t/lcd-interface-with-wavecom-module/176>\
**Category:** Documentation feedback\
**Created:** [December 15, 2005, 12:58pm UTC](https://forum.sierrawireless.com/t/lcd-interface-with-wavecom-module/176 "2005-12-15T12:58:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rahul\_repal](https://avatars.discourse-cdn.com/v4/letter/r/53a042/32.png) [@rahul\_repal](https://forum.sierrawireless.com/u/rahul_repal)\
**Post date:** [December 15, 2005, 12:58pm UTC](https://forum.sierrawireless.com/t/lcd-interface-with-wavecom-module/176/1 "2005-12-15T12:58:11Z")

</div>

Hi,  
I want to interface a LCD with wavecom module.  
But I don’t have a SPI LCD.The LCD which I have contains 16 pins  
out of which 8 pins are data pins and three are control pins. So any body  
knows how to interface this LCD with wavecom module.

---

<div class="post-metadata">

**Author:** ![skos](https://avatars.discourse-cdn.com/v4/letter/s/bc79bd/32.png) [@skos](https://forum.sierrawireless.com/u/skos)\
**Post date:** [January 12, 2006, 8:18am UTC](https://forum.sierrawireless.com/t/lcd-interface-with-wavecom-module/176/2 "2006-01-12T08:18:10Z")

</div>

hi rahul\_repal,

a easy possiblility for your problem is when you get a interface-ic from SPI to GPIO.  
With this ic you can program every GPIO as input or output.  
(e.g. MAX6956)

Good luck  
skos