# LAN internal routing on GX450 with ALEOS 4.8.1 **URL:** \ **Category:** AirLink routers\ **Created:** [September 24, 2017, 4:46am UTC](https://forum.sierrawireless.com/t/lan-internal-routing-on-gx450-with-aleos-4-8-1/9511 "2017-09-24T04:46:22Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![fagersrd](https://avatars.discourse-cdn.com/v4/letter/f/6f9a4e/32.png) [@fagersrd](https://forum.sierrawireless.com/u/fagersrd)\ **Post date:** [September 24, 2017, 4:46am UTC](https://forum.sierrawireless.com/t/lan-internal-routing-on-gx450-with-aleos-4-8-1/9511/1 "2017-09-24T04:46:22Z")
I have a GX450 ALEOS or 4.8.1 with an additional router on the LAN side for access to an additional subnet 192.168.51.0/24. My LAN port is a static configuration of 192.168.58.133/24 I added under the LAN tab “Host Port Routing” as per manual and rebooted. Host Network 2 192.168.51.0 Host Network subnet Mask 2 255.255.255.0 Host network 2 route Gateway Host Network 2 Gateway 192.168.58.254 The 192.168.58.254 is the additional router’s port address on the same subnet of the GX450 LAN port subnet 192.168.58.0/24. It has another port for the 192.168.51.0/24. I can ping 192.168.51.4 from the Subnet 192.168.58.0/24 from a PC, but from GX450 I cannot so I cannot connect to the GX450 from the 192.168.51.0/24 subnet. The GX450 is not sending the packet out the LAN port when I try and ping from the GX450 Is there any else that needs to be done for LAN side routing from the GX450 for subnet outside of it’s local subnet? ---
**Author:** ![fagersrd](https://avatars.discourse-cdn.com/v4/letter/f/6f9a4e/32.png) [@fagersrd](https://forum.sierrawireless.com/u/fagersrd)\ **Post date:** [August 13, 2018, 12:32pm UTC](https://forum.sierrawireless.com/t/lan-internal-routing-on-gx450-with-aleos-4-8-1/9511/2 "2018-08-13T12:32:58Z")
FYI, After upgrading to ALEOS 4.9.3 this problem started working without any changes. I do not know if it was fixed on a version between 4.8.1 to 4.9.3 since I upgraded from 4.8.1 to 4.9.3.