# Hung up RV50 - Flashing green network light- manual reset required

**URL:** <https://forum.sierrawireless.com/t/hung-up-rv50-flashing-green-network-light-manual-reset-required/14742>\
**Category:** AirLink Routers\
**Created:** [December 11, 2018, 9:34pm UTC](https://forum.sierrawireless.com/t/hung-up-rv50-flashing-green-network-light-manual-reset-required/14742 "2018-12-11T21:34:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MatthewTait](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@MatthewTait](https://forum.sierrawireless.com/u/MatthewTait)\
**Post date:** [December 11, 2018, 9:34pm UTC](https://forum.sierrawireless.com/t/hung-up-rv50-flashing-green-network-light-manual-reset-required/14742/1 "2018-12-11T21:34:54Z")

</div>

Hello, I have two RV50 gateways that usually work well, however- when the modems lose power / are rebooted it they often get hung up in connecting to network (flashing green network light- flashes are: on green 2-3 seconds, off, repeat- Power = solid green; Signal = solid green; activity= infrequent green flashes ) during this condition there’s no cell communication and i’m unable to access ACEmanager via direct Ethernet connection to gateway. The gateway stays in this condition indefinitely (2 weeks+).

In order to resolve this (and connect to the ACEmanager via Ethernet) I need to reset the gateway a number of times until the network light stays green- the number of resets required seems to be random.

… any idea what could be is causing this?

Current versions:  
ALEOS- 4.11.2.004  
Radio- MC7354\_GENNA- UMTS\_55580  
Network= Bell Canada

---

<div class="post-metadata">

**Author:** ![thonguyen](https://avatars.discourse-cdn.com/v4/letter/t/a6a055/32.png) [@thonguyen](https://forum.sierrawireless.com/u/thonguyen)\
**Post date:** [December 20, 2018, 4:02am UTC](https://forum.sierrawireless.com/t/hung-up-rv50-flashing-green-network-light-manual-reset-required/14742/2 "2018-12-20T04:02:50Z")

</div>

did you down rev the aleos and see if its behaving the same?  
Got a case open with support? i’m curious to find out what’s causing this too.
