# HTTP connection using +WIP AT commands **URL:** \ **Category:** Open AT\ **Created:** [June 15, 2009, 12:27pm UTC](https://forum.sierrawireless.com/t/http-connection-using-wip-at-commands/3334 "2009-06-15T12:27:22Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![mosama](https://avatars.discourse-cdn.com/v4/letter/m/278dde/32.png) [@mosama](https://forum.sierrawireless.com/u/mosama)\ **Post date:** [June 15, 2009, 12:27pm UTC](https://forum.sierrawireless.com/t/http-connection-using-wip-at-commands/3334/1 "2009-06-15T12:27:22Z")
I’ve tried several times to connect to HTTP site via +WIP AT commands but in vein. I followed the example given in the WIPAT\_COMMANDS\_USER\_GUIDE\_V3\_11: at+wipcfg=1 OK at+wipbr=1,6 OK at+wipbr=2,6,11,“APN” OK at+wipbr=2,6,0,“internet” OK at+wipbr=2,6,1,“internet” OK at+wipbr=4,6,0 OK at+wipcreate=5,1,“[www.google.com](http://www.google.com)”,80 +CME ERROR: 3 at+wipcreate=5,1 +CME ERROR: 3 I don’t know where is the problem. every at+wipcreate gives error 3 please help ---
**Author:** ![davidc](https://avatars.discourse-cdn.com/v4/letter/d/a183cd/32.png) [@davidc](https://forum.sierrawireless.com/u/davidc)\ **Post date:** [June 15, 2009, 10:40pm UTC](https://forum.sierrawireless.com/t/http-connection-using-wip-at-commands/3334/2 "2009-06-15T22:40:45Z")
Hiya, Looks like the bearer connection has failed. Have you got the correct APN/Username?password for your ISP? Is your SIM card enabled for GPRS Data? Have you enabled AT+CMEE=1? It looks like you have, but I can’t find any indication of what +CME=3 indicates. All the WIP CME errors are around 800 or so. ciao, Dave ---
**Author:** ![mosama](https://avatars.discourse-cdn.com/v4/letter/m/278dde/32.png) [@mosama](https://forum.sierrawireless.com/u/mosama)\ **Post date:** [June 16, 2009, 11:18am UTC](https://forum.sierrawireless.com/t/http-connection-using-wip-at-commands/3334/3 "2009-06-16T11:18:47Z")
yes ,that’s the strange thing. that was on “Q24 Plus” module. but I’ve tried the same on another module “Q2687” and the +wipcreate works wright now. I don’t know what’s the difference between both modules. but still I can’t get any data from any site using the +WIPFILE command. I receives error 831 (bad state) ---
**Author:** ![HARDTECH](https://avatars.discourse-cdn.com/v4/letter/h/c4cdca/32.png) [@HARDTECH](https://forum.sierrawireless.com/u/HARDTECH)\ **Post date:** [June 30, 2009, 1:22pm UTC](https://forum.sierrawireless.com/t/http-connection-using-wip-at-commands/3334/4 "2009-06-30T13:22:30Z")
Hi, We have the same problem with a Fastrack Supreme 20. We try to connect with HTTP, FTP, SMTP but we have ERROR 3 with the WIPCREATE command. WIPCREATE works well only with UDP or TCP sockets connections but when we try to send data (wipdata), our wavecom make a reboot. here our AT commands listing: at+cmee=1 OK at+cpin=0000 OK at+cgatt=1 OK at+cgact=1,1 OK atd_99_\*\*1# CONNECT 115200 … +++ OK NO CARRIER at+wipcfg=1 OK at+wipbr=1,6 OK at+wipbr=2,6,11,“APN” OK at+wipbr=2,6,0,“login APN” OK at+wipbr=2,6,1,“password APN” OK at+wipbr=4,6,0 OK at+wipcreate=1,1,80,“[www.wavecom.com](http://www.wavecom.com)”,80 OK +WIPREADY:1,1 at+wipdata=1,1,1 CONNECT … +WIND:13 +WIND:4 We must redo all the sequence to retry a connection. Without the atd_99_\*\*1#, the at+wipbr=4,6,0 don’t work. The french technical support don’t be available since one week. Can you help us please? Thanks a lot. Celine. ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [June 30, 2009, 1:39pm UTC](https://forum.sierrawireless.com/t/http-connection-using-wip-at-commands/3334/5 "2009-06-30T13:39:02Z")
> [@HARDTECH](#): > > We try to connect with HTTP, FTP, SMTP but we have ERROR 3 with the WIPCREATE command. WIPCREATE works well only with UDP or TCP sockets connections Do you have the Internet Protocol Option enabled? See: [viewtopic.php?f=16&t=3622&p=14001&hilit=internet#p13946](http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?f=16&t=3622&p=14001&hilit=internet#p13946) ---
**Author:** ![HARDTECH](https://avatars.discourse-cdn.com/v4/letter/h/c4cdca/32.png) [@HARDTECH](https://forum.sierrawireless.com/u/HARDTECH)\ **Post date:** [June 30, 2009, 2:22pm UTC](https://forum.sierrawireless.com/t/http-connection-using-wip-at-commands/3334/6 "2009-06-30T14:22:40Z")
Thanks for your answer. at+wcfm=5 +WCFM: 00000030,0 OK So if I understood well the user guide, my wavecom have: Real Time Operating System (0x10) Open Sim Access (0x30) but not Internet Plug-in (0x01). I will contact our distributor. Question: what is ‘Orange M2M Connect’? Our SIM distributor is Orange (France): is it the same ‘Orange’? Thanks. Celine. ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [June 30, 2009, 2:40pm UTC](https://forum.sierrawireless.com/t/http-connection-using-wip-at-commands/3334/7 "2009-06-30T14:40:16Z")
> [@HARDTECH](#): > > Question: what is ‘Orange M2M Connect’? I think it’s a specific service from Orange? ---
**Author:** ![KyLinT](https://avatars.discourse-cdn.com/v4/letter/k/f9ae1b/32.png) [@KyLinT](https://forum.sierrawireless.com/u/KyLinT)\ **Post date:** [August 13, 2009, 5:39am UTC](https://forum.sierrawireless.com/t/http-connection-using-wip-at-commands/3334/8 "2009-08-13T05:39:30Z")
> [@davidc](#): > > Hiya, > > Looks like the bearer connection has failed. Have you got the correct APN/Username?password for your ISP? Is your SIM card enabled for GPRS Data? > > Have you enabled AT+CMEE=1? It looks like you have, but I can’t find any indication of what +CME=3 indicates. All the WIP CME errors are around 800 or so. > > ciao, Dave I am new and I don’t know how to solve the problem. But I found out that +CMEE 3 error means “the operation is not allowed”. Therefore, it seems like the steps above are not right yet. Cheers! ---
**Author:** ![davidc](https://avatars.discourse-cdn.com/v4/letter/d/a183cd/32.png) [@davidc](https://forum.sierrawireless.com/u/davidc)\ **Post date:** [August 17, 2009, 5:51am UTC](https://forum.sierrawireless.com/t/http-connection-using-wip-at-commands/3334/9 "2009-08-17T05:51:38Z")
Hiya, > [@KyLinT](#): > > But I found out that +CMEE 3 error means “the operation is not allowed” OK, sounds like your modem is not enabled for the Internet Protocol Commercial Service. Check the results of AT+WCFM=5 (and see the above post for another user with the same issue). If the modem is not enabled for Internet Protocol, you’ll have to go back to your distributor to get it enabled. ciao, Dave