# How to setup 3g only at MC8305 and MC7710 using AT commands?

**URL:** <https://forum.sierrawireless.com/t/how-to-setup-3g-only-at-mc8305-and-mc7710-using-at-commands/6962>\
**Category:** MC/EM Series\
**Created:** [January 13, 2014, 6:16pm UTC](https://forum.sierrawireless.com/t/how-to-setup-3g-only-at-mc8305-and-mc7710-using-at-commands/6962 "2014-01-13T18:16:16Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://forum.sierrawireless.com/u/lotam)\
**Post date:** [January 27, 2014, 8:56am UTC](https://forum.sierrawireless.com/t/how-to-setup-3g-only-at-mc8305-and-mc7710-using-at-commands/6962/4 "2014-01-27T08:56:48Z")

</div>

> [@SList](#):
>
> Hi lotam,
> 
> is the AT command AT!SELRAT supported on the MC7710?
> 
> How can I show a complete list of supported AT commands for this device?
> 
> According to the document “AirPrime MC/SL-Series (UMTS/LTE) Extended AT Command Reference”, the AT command AT!SELACQ sets the bearer preference, and this is valid for the MC7710 (Table 1.1).
> 
> Should I use AT!SELRAT or AT!SELACQ?

Hi SList,

Sorry that I missed your post, please always start a new thread for your questions (especially for different topics) so your post can be spotted easier.  
Btw, I already responded your post at:  
[url][MC7710, how to use AT!SELACQ ?](https://forum.sierrawireless.com/t/mc7710-how-to-use-at-selacq/6974/1)]

Hope you find it useful, thanks.  
L

---

_[View the full topic](https://forum.sierrawireless.com/t/how-to-setup-3g-only-at-mc8305-and-mc7710-using-at-commands/6962)._