# How to get delivery report **URL:** \ **Category:** Legacy AirPrime modules\ **Created:** [December 8, 2010, 6:53am UTC](https://forum.sierrawireless.com/t/how-to-get-delivery-report/4769 "2010-12-08T06:53:42Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![nagendra81](https://avatars.discourse-cdn.com/v4/letter/n/90db22/32.png) [@nagendra81](https://forum.sierrawireless.com/u/nagendra81)\ **Post date:** [December 8, 2010, 6:53am UTC](https://forum.sierrawireless.com/t/how-to-get-delivery-report/4769/1 "2010-12-08T06:53:42Z")
Hi all, i have one doubt regarding that How to get confirm the message sent sucessfully ? and How to get Delivery report of message sent? i seen one event ADL\_SMS\_EVENT\_SENDING\_OK ,but without this event is there any confirmation of sending message sucesses? In firmware How to implement to get confirmation of message sending ? please help me regarding this. Thanks & Advance regards Nagendra ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [December 8, 2010, 7:08am UTC](https://forum.sierrawireless.com/t/how-to-get-delivery-report/4769/2 "2010-12-08T07:08:57Z")
> [@nagendra81](#): > > In firmware How to implement to get confirmation of message sending ? There is no specific API - you just have to use the normal AT commands. See: [New Features - Complete API](https://forum.sierrawireless.com/t/new-features-complete-api/3305/1) ---
**Author:** ![JasonDiplomat](https://avatars.discourse-cdn.com/v4/letter/j/71e660/32.png) [@JasonDiplomat](https://forum.sierrawireless.com/u/JasonDiplomat)\ **Post date:** [December 8, 2010, 6:17pm UTC](https://forum.sierrawireless.com/t/how-to-get-delivery-report/4769/3 "2010-12-08T18:17:41Z")
Use AT+CSMP? (“17.3 Set Text Mode Parameters” in the AT command interface guide) AT+CSMP=,,, Examples: AT+CSMP=177,3,0,241 //20 mins validity period with delivery receipt (177 = $B1 = %1011 0001) AT+CSMP=145,3,0,241 //no delivery receipt (145 = $91 = %1001 0001) Note that the AT command interface guide references other documents although I can’t find which documents are referenced? The scheme is documented in GSM 03.38: [mobilecity.cz/doc/GSM\_03.38\_5.3.0.pdf](http://www.mobilecity.cz/doc/GSM_03.38_5.3.0.pdf) …although I’ve noted this from a tutorial somewhere: 240 = GSM coding, and SM sent to destination terminal directly 241 = GSM coding, and SM SIM card storage According to GSM 03:38, “241” (= $F1 = %1111 0001) means: “Data coding/message class” Default alphabet Class 1 - default-meaning - ME-specific > [@](#): > > When a mobile terminated message is Class 1, the MS shall send an acknowledgement to the SC when > the message has successfully reached the MS and can be stored. The MS shall normally store the > message in the ME by default, if that is possible, but otherwise the message may be stored elsewhere, > e.g. in the SIM. The user may be able to override the default meaning and select their own routing. ---
**Author:** ![nagendra81](https://avatars.discourse-cdn.com/v4/letter/n/90db22/32.png) [@nagendra81](https://forum.sierrawireless.com/u/nagendra81)\ **Post date:** [December 9, 2010, 12:31pm UTC](https://forum.sierrawireless.com/t/how-to-get-delivery-report/4769/4 "2010-12-09T12:31:42Z")
Hi awniel and jason, Thanks for reply. at+csmp is only for setting ,is it? once set the parametrs like at+csmp=177,3,0,241 after at+csas stored ine2p but i quereied same setting parametrs displayed. at+csmp? +csmp 177,3,0,241 i have doubt is this only setting ? How to use this command to detect delivery report? please let me know . thanks &i regards nagendra