# How to configure to send location data to cloud

**URL:** <https://forum.sierrawireless.com/t/how-to-configure-to-send-location-data-to-cloud/25242>\
**Category:** Octave\
**Created:** [October 19, 2021, 8:16am UTC](https://forum.sierrawireless.com/t/how-to-configure-to-send-location-data-to-cloud/25242 "2021-10-19T08:16:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tgoto](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/tgoto/32/5055_2.png) [@tgoto](https://forum.sierrawireless.com/u/tgoto)\
**Post date:** [October 19, 2021, 8:16am UTC](https://forum.sierrawireless.com/t/how-to-configure-to-send-location-data-to-cloud/25242/1 "2021-10-19T08:16:26Z")

</div>

I’m referring to following URL.

> **[Pushing Data from Octave to IoT Central](https://docs.octave.dev/docs/pushing-data-from-octave-to-iot-central#instructions)**
>
> This topic describes how to integrate Octave with Microsoft Azure IoT Central to report sensor data to your IoT Central application. 1. Setting up IoT Central and Device Bridge Create your IoT Central application in the Azure Portal:Navigate to:...

Now, I’m trying to configure “Custom Deployment” but there is “No available items” in “Subscription” as follows.

 ![Custom_Deployment_No-Subscription](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/3/3bed532e1a83e38bfa4ebd2202d0190d3ed0ae35.png)

How can I show like “Octave-Stage” ???

I’m not familiar with to use cloud platform like Azure so sorry for the basic question.

Thank you.  
–TAK

---

<div class="post-metadata">

**Author:** ![tgoto](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/tgoto/32/5055_2.png) [@tgoto](https://forum.sierrawireless.com/u/tgoto)\
**Post date:** [October 19, 2021, 8:19am UTC](https://forum.sierrawireless.com/t/how-to-configure-to-send-location-data-to-cloud/25242/2 "2021-10-19T08:19:29Z")

</div>

BTW, I’m using mangOH Red board and try to send and show location data with map like

 ![18564f1-Sans_titre](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/f/f2e66a9296530306e7a342560d0877b4050d266a.png)

---

<div class="post-metadata">

**Author:** ![amons](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/amons/32/4887_2.png) [@amons](https://forum.sierrawireless.com/u/amons)\
**Post date:** [October 26, 2021, 12:59pm UTC](https://forum.sierrawireless.com/t/how-to-configure-to-send-location-data-to-cloud/25242/3 "2021-10-26T12:59:15Z")

</div>

Hello,

We now have a connector that simplifies the IoT Central integration: [Pushing Events via Cloud Connectors](https://docs.octave.dev/docs/pushing-events-via-cloud-connectors#using-azure-device-provisioning-service-dps-plug-and-play-or-iot-central)

I would recommend you to use this approach, we will soon remove the part of the documentation you are refering to.

I order to report location, you will need to enable the location sensor, report it in a Stream (thanks to an Observation) and collect data from that stream as Telemetry forwarded to IoT Central.  
In IoT Central, you need to create a Location Telemety item as part of your device template

A.