# How to Configure FX30 to work with a sim card

**URL:** <https://forum.sierrawireless.com/t/how-to-configure-fx30-to-work-with-a-sim-card/29814>\
**Category:** Uncategorized\
**Created:** [May 22, 2023, 12:03pm UTC](https://forum.sierrawireless.com/t/how-to-configure-fx30-to-work-with-a-sim-card/29814 "2023-05-22T12:03:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mousa.nagy](https://avatars.discourse-cdn.com/v4/letter/m/eb8c5e/32.png) [@mousa.nagy](https://forum.sierrawireless.com/u/mousa.nagy)\
**Post date:** [May 22, 2023, 12:03pm UTC](https://forum.sierrawireless.com/t/how-to-configure-fx30-to-work-with-a-sim-card/29814/1 "2023-05-22T12:03:41Z")

</div>

hi, I’m new to FX30 and have no ideas on how is the process  
I inserted a sim card and configured the APN but still i cannot get it work  
i will use the Modem for a simple connection , have one Kiosk that i need to connect it to using USB or Ethernet  
ATi

Manufacturer: Sierra Wireless, Incorporated  
Model: FX30(WP7607-1)  
Revision: SWI9X07Y\_02.18.05.00 000000 jenkins 2018/07/19 17:40:21  
IMEI: 352650100107933  
IMEI SV: 5  
FSN: V2920200511210  
+GCAP: +CGSM

OK  
at!gstatus?

!GSTATUS:  
Current Time: 1941 Temperature: 29  
Modem Mitigate Level: 0 ModemProc Mitigate Level: 0   
Reset Counter: 1 Mode: ONLINE  
System mode: LTE PS state: Attached  
LTE band: B3 LTE bw: 10 MHz  
LTE Rx chan: 1450 LTE Tx chan: 19450  
LTE CA state: INACTIVE  
EMM state: Registered Normal Service  
RRC state: RRC Idle  
IMS reg state: No Srv

PCC RxM RSSI: -72 RSRP (dBm): -99  
PCC RxD RSSI: -96 RSRP (dBm): -135  
Tx Power: 0 TAC: 01FD (509)  
RSRQ (dB): -10 Cell ID: 00A54507 (10831111)  
SINR (dB): 12.2

OK

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 22, 2023, 12:54pm UTC](https://forum.sierrawireless.com/t/how-to-configure-fx30-to-work-with-a-sim-card/29814/2 "2023-05-22T12:54:43Z")

</div>

You can see here to share cellular data to ethernet client

> **[Setting up MangOH Red as Router to Cellular Gateway](https://mangoh.discourse.group/t/setting-up-mangoh-red-as-router-to-cellular-gateway/1241)**
>
> Objective: Configure a MangOH to route cellular internet data to/from other network interfaces. For example the image below shows how we will route traffic to/from the ethernet IoT slot to/from the cellular gateway. Solution: To configure...

For sharing cellular data to USB ECM interface, you can see here:

> [@Using fx30, internet router](https://forum.sierrawireless.com/t/using-fx30-internet-router/15046/2):
>
> You can share the data connection with USB ECM interface: Fx30 side: echo \> /etc/resolv.conf cm data connect & iptables --flush iptables -t nat -A POSTROUTING --out-interface rmnet0 -j MASQUERADE iptables -A FORWARD -o usb0 -i rmnet0 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i usb0 -o rmnet0 -j ACCEPT echo 1 \> /proc/sys/net/ipv4/ip\_forward cat /etc/resolv.conf nameserver 10.144.148.1 nameserver 10.145.148.5 PC side: sudo route add default gw 192.168.2.2 us…

(as your FX30 is using WP76 module, you need to change the “usb0” to “ecm0” and “rmnet0” to “rmnet\_data0” inside those commands)