# How do I permanently disable the registration to a specific band?

**URL:** <https://forum.sierrawireless.com/t/how-do-i-permanently-disable-the-registration-to-a-specific-band/21301>\
**Category:** IoT Modules\
**Created:** [August 25, 2020, 6:44pm UTC](https://forum.sierrawireless.com/t/how-do-i-permanently-disable-the-registration-to-a-specific-band/21301 "2020-08-25T18:44:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![akn](https://avatars.discourse-cdn.com/v4/letter/a/f17d59/32.png) [@akn](https://forum.sierrawireless.com/u/akn)\
**Post date:** [August 25, 2020, 6:44pm UTC](https://forum.sierrawireless.com/t/how-do-i-permanently-disable-the-registration-to-a-specific-band/21301/1 "2020-08-25T18:44:35Z")

</div>

How do I permanently disable the registration to a specific band?

Currently I always need to refer AT!BAND=? and create a new set accordingly. I am looking for a generic way to globally disable it.

This way I can stick with the firmware provided set without creating a new set.

00, All bands  
01, Europe 3G  
02, North America 3G  
06, Europe  
07, North America  
08, WCDMA ALL  
09, LTE ALL

---

<div class="post-metadata">

**Author:** ![jerdung](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@jerdung](https://forum.sierrawireless.com/u/jerdung)\
**Post date:** [August 26, 2020, 3:42am UTC](https://forum.sierrawireless.com/t/how-do-i-permanently-disable-the-registration-to-a-specific-band/21301/2 "2020-08-26T03:42:44Z")

</div>

Hi akn,  
There is no way to disable a specific band. You should create a new set band with AT!BAND and then select this set for device.  
Ex: new set with B1,2,3 -\> AT!BAND=10,“TEST”,0,7,0  
Remember unlock device before set band (AT!UNLOCK=“A710”)

Thanks

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [August 26, 2020, 6:35am UTC](https://forum.sierrawireless.com/t/how-do-i-permanently-disable-the-registration-to-a-specific-band/21301/3 "2020-08-26T06:35:14Z")

</div>

@akn

You need to use at!entercnd=“A710” to allow you to set the band mask with at!band. The command at!unlock is to level 3 unlock a unit which is not available on normal production units.

Regards

Matt

---

<div class="post-metadata">

**Author:** ![akn](https://avatars.discourse-cdn.com/v4/letter/a/f17d59/32.png) [@akn](https://forum.sierrawireless.com/u/akn)\
**Post date:** [August 26, 2020, 11:10pm UTC](https://forum.sierrawireless.com/t/how-do-i-permanently-disable-the-registration-to-a-specific-band/21301/4 "2020-08-26T23:10:20Z")

</div>

> [@mlw](#):
>
> band mask

Please confirm if the user defined band set is permanently maintained by ME (after reboot, firmware change etc)?

How do I maintain a generic band set? for example ALL BANDS - BAND X

I have observed that for “ALL BANDS” the 3G/4G mask is not same across different operator selection.

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [September 1, 2020, 7:24am UTC](https://forum.sierrawireless.com/t/how-do-i-permanently-disable-the-registration-to-a-specific-band/21301/5 "2020-09-01T07:24:35Z")

</div>

@akn

Yes it is saved to flash, and no the ‘all bands’ may not be the same across all carrier PRI files depending on the carriers requirements.

Regards

Matt
