# How Do I get a LX60 Listen on Multiple Interfaces? **URL:** \ **Category:** AirLink Routers\ **Created:** [August 10, 2021, 2:27am UTC](https://forum.sierrawireless.com/t/how-do-i-get-a-lx60-listen-on-multiple-interfaces/24522 "2021-08-10T02:27:03Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![kevinds](https://avatars.discourse-cdn.com/v4/letter/k/34f0e0/32.png) [@kevinds](https://forum.sierrawireless.com/u/kevinds)\ **Post date:** [August 10, 2021, 2:27am UTC](https://forum.sierrawireless.com/t/how-do-i-get-a-lx60-listen-on-multiple-interfaces/24522/1 "2021-08-10T02:27:04Z")
Hello, Setting up a LX60 to be installed remotely, specifically for the reverse telnet/SSH serial port function… The issue I am having with it is that the server only seems to listen on one interface at a time. If I have Ethernet (WAN) setup and cellular, I can use one or the other, but not both, there is simply no response from the one not working. I am expecting to be able to connect to any IP address the device has. If connected to the console port of the remote router, I expect to be able to connect to the Ethernet WAN IP of the LX60 to get access to the router console. If the network is down, I expect to be able to connect to the cellular IP… The ‘WAN’ might still be ‘up’ even if I can’t connect to the IP. Am I missing a setting for it to listen on all interfaces at the same time? Is there a way to get a root shell on the LX60? ---
**Author:** ![Donald](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@Donald](https://forum.sierrawireless.com/u/Donald)\ **Post date:** [August 10, 2021, 3:31am UTC](https://forum.sierrawireless.com/t/how-do-i-get-a-lx60-listen-on-multiple-interfaces/24522/2 "2021-08-10T03:31:44Z")
Hi kevinds, > [@kevinds](#): > > If the network is down, I expect to be able to connect to the cellular IP… The ‘WAN’ might still be ‘up’ even if I can’t connect to the IP. You can configure interface priority plus monitoring. Highest Priority = Ethernet Second Priority = Cellular If the gateway receives a response to a ping sent over the Ethernet WAN network, it uses the Ethernet WAN interface. If the gateway does not receive a response to a ping sent over the Ethernet WAN, it attempts to connect to the cellular network. Please refer to pages 72 to 75 in [AirLink LX60 Series Software Configuration Guide](https://source.sierrawireless.com/resources/airlink/software_reference_docs/airlink-lx-series---configuration-guide/#sthash.axccAjWq.dpbs) for more details. > [@kevinds](#): > > Is there a way to get a root shell on the LX60? You can configure Telnet or SSH protocol to connect to the LX60 gateway. Go to ACEmanager-\> Services-\>AT (Telnet/SSH). ---
**Author:** ![kevinds](https://avatars.discourse-cdn.com/v4/letter/k/34f0e0/32.png) [@kevinds](https://forum.sierrawireless.com/u/kevinds)\ **Post date:** [August 10, 2021, 3:54am UTC](https://forum.sierrawireless.com/t/how-do-i-get-a-lx60-listen-on-multiple-interfaces/24522/3 "2021-08-10T03:54:06Z")
> You can configure interface priority plus monitoring. > Highest Priority = Ethernet > Second Priority = Cellular Yes, but I want it to listen on all interfaces, all the time. I’m hoping the LX60 will use the Priority list for it’s outgoing traffic. > You can configure Telnet or SSH protocol to connect to the LX60 gateway. > Go to ACEmanager-\> Services-\>AT (Telnet/SSH). This gets me some sort of limited shell that lets me enter AT commands, is there something I enter to get to a root shell that I may have missed in the manuals? ---
**Author:** ![Donald](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@Donald](https://forum.sierrawireless.com/u/Donald)\ **Post date:** [August 11, 2021, 7:08am UTC](https://forum.sierrawireless.com/t/how-do-i-get-a-lx60-listen-on-multiple-interfaces/24522/4 "2021-08-11T07:08:21Z")
Hi kevinds, It can only listen on one interface at a time. > [@kevinds](#): > > is there something I enter to get to a root shell that I may have missed in the manuals? No, there is not.