# How can I detect availability of EGPRS (EDGE) service?

**URL:** <https://forum.sierrawireless.com/t/how-can-i-detect-availability-of-egprs-edge-service/884>\
**Category:** Legacy AirPrime modules\
**Created:** [November 23, 2006, 10:45am UTC](https://forum.sierrawireless.com/t/how-can-i-detect-availability-of-egprs-edge-service/884 "2006-11-23T10:45:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![nibble](https://avatars.discourse-cdn.com/v4/letter/n/ed655f/32.png) [@nibble](https://forum.sierrawireless.com/u/nibble)\
**Post date:** [November 23, 2006, 10:45am UTC](https://forum.sierrawireless.com/t/how-can-i-detect-availability-of-egprs-edge-service/884/1 "2006-11-23T10:45:20Z")

</div>

Hi,  
I’ve not found in the Open AT guide, neither in the ADL Guide any advice on how to obtain information of EGPRS availability…

Is it possible? and how?

Best regards  
nibble

---

<div class="post-metadata">

**Author:** ![kaliwing](https://avatars.discourse-cdn.com/v4/letter/k/a8b319/32.png) [@kaliwing](https://forum.sierrawireless.com/u/kaliwing)\
**Post date:** [February 15, 2007, 2:31pm UTC](https://forum.sierrawireless.com/t/how-can-i-detect-availability-of-egprs-edge-service/884/2 "2007-02-15T14:31:44Z")

</div>

in the 6.62 firmware it seem that you will have an EDGE service indication to state when you are doing an EDGE transfer Vs A GPRS one.
