# HL7802.4.6.9 - USB AT port - CGDCONT - Only contexts 1,2 seem to be accepted **URL:** \ **Category:** HL78\ **Created:** [February 1, 2022, 5:37pm UTC](https://forum.sierrawireless.com/t/hl7802-4-6-9-usb-at-port-cgdcont-only-contexts-1-2-seem-to-be-accepted/26127 "2022-02-01T17:37:30Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\ **Post date:** [February 2, 2022, 11:13am UTC](https://forum.sierrawireless.com/t/hl7802-4-6-9-usb-at-port-cgdcont-only-contexts-1-2-seem-to-be-accepted/26127/4 "2022-02-02T11:13:16Z")
@johnofleek So as @jyijyi said the number of CID’s available to work with varies depending on the KCARRIERCFG command setting which is dicussed in the [customisation APN](https://source.sierrawireless.com/resources/airprime/application_notes_and_code_samples/airprime_hl7800-m_mno_and_rf_band_customization_at_customer_production_site_application_note/#sthash.QAiPHl0Y.SpqTDh1l.dpbs), in this APN in table 2 row 4 (not counting the header) it shows the numbers of CID’s available for use for a given carrier config, for the default there is 1 and 2. What you are asking for is for the number of CID’s available to be used/set to be expanded to the theoretical 15, not for it to be ‘fixed’ as this is documented behaviour and so consequently it is not a bug. Regards Matt --- _[View the full topic](https://forum.sierrawireless.com/t/hl7802-4-6-9-usb-at-port-cgdcont-only-contexts-1-2-seem-to-be-accepted/26127)._