# HL7800: Error after KURCCFG="HTTP",0,0

**URL:** <https://forum.sierrawireless.com/t/hl7800-error-after-kurccfg-http-0-0/21807>\
**Category:** HL78\
**Created:** [October 14, 2020, 6:45pm UTC](https://forum.sierrawireless.com/t/hl7800-error-after-kurccfg-http-0-0/21807 "2020-10-14T18:45:17Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rique](https://avatars.discourse-cdn.com/v4/letter/r/d26b3c/32.png) [@Rique](https://forum.sierrawireless.com/u/Rique)\
**Post date:** [October 14, 2020, 6:45pm UTC](https://forum.sierrawireless.com/t/hl7800-error-after-kurccfg-http-0-0/21807/1 "2020-10-14T18:45:18Z")

</div>

Having a strange problem with the following sequence of commands. We do not see this on another board.  
We are at the latest firmware revision as of today.

AT  
OK  
AT+CEDRXS=0  
OK  
AT+CPSMS=1  
OK  
AT+KSLEEP=1,1,10  
OK  
AT+CREG=0  
OK  
AT+CFUN=1  
OK  
AT&K3  
OK  
AT+KURCCFG=“TCP”,0,0  
OK  
AT+KURCCFG=“HTTP”,0,0  
ERROR

Any help would be appreciated.

---

<div class="post-metadata">

**Author:** ![Donald](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@Donald](https://forum.sierrawireless.com/u/Donald)\
**Post date:** [October 15, 2020, 2:48am UTC](https://forum.sierrawireless.com/t/hl7800-error-after-kurccfg-http-0-0/21807/2 "2020-10-15T02:48:45Z")

</div>

Hi @Rique

Please send to me the response of ATI3 command.  
Are you still having this issue when you disable sleep mode(AT+KSLEEP=2)?

---

<div class="post-metadata">

**Author:** ![Rique](https://avatars.discourse-cdn.com/v4/letter/r/d26b3c/32.png) [@Rique](https://forum.sierrawireless.com/u/Rique)\
**Post date:** [October 15, 2020, 3:02am UTC](https://forum.sierrawireless.com/t/hl7800-error-after-kurccfg-http-0-0/21807/3 "2020-10-15T03:02:35Z")

</div>

The ati3 command produces this output:  
BHL7800.1.7.7.2.20181009

Disabling sleep as you asked doesn’t fix the issue.

---

<div class="post-metadata">

**Author:** ![Donald](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@Donald](https://forum.sierrawireless.com/u/Donald)\
**Post date:** [October 15, 2020, 6:58am UTC](https://forum.sierrawireless.com/t/hl7800-error-after-kurccfg-http-0-0/21807/4 "2020-10-15T06:58:49Z")

</div>

Hi @Rique

The firmware version in your HL7800 module is very old.

Please download the latest one and retry. You can get it here [HL78xx (HL7800/HL7800-M/HL7802) Firmware](https://source.sierrawireless.com/resources/airprime/software/hl7800-firmware/hl78xx-firmware/#sthash.Sq7iQxqi.dpbs)

Help to tick “Solution” if your question is answered.

---

<div class="post-metadata">

**Author:** ![Rique](https://avatars.discourse-cdn.com/v4/letter/r/d26b3c/32.png) [@Rique](https://forum.sierrawireless.com/u/Rique)\
**Post date:** [October 15, 2020, 11:34am UTC](https://forum.sierrawireless.com/t/hl7800-error-after-kurccfg-http-0-0/21807/5 "2020-10-15T11:34:42Z")

</div>

That is very strange. I complete the upgrade of the module to this revision level as soon as we put it on the bench to test. Obviously it didn’t take. I ugraded the software and the problem is resolved. Thanks for pointing it out.

---

<div class="post-metadata">

**Author:** ![Donald](https://avatars.discourse-cdn.com/v4/letter/d/ac8455/32.png) [@Donald](https://forum.sierrawireless.com/u/Donald)\
**Post date:** [October 16, 2020, 2:53am UTC](https://forum.sierrawireless.com/t/hl7800-error-after-kurccfg-http-0-0/21807/6 "2020-10-16T02:53:08Z")

</div>

Hi @Rique

The problem is resolved. Could you help to click to “Solution” on the answer?