# HL7618RD not registering to network

**URL:** <https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015>\
**Category:** Legacy HL Series\
**Created:** [April 9, 2019, 9:52am UTC](https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015 "2019-04-09T09:52:46Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![lucasRotava](https://avatars.discourse-cdn.com/v4/letter/l/c57346/32.png) [@lucasRotava](https://forum.sierrawireless.com/u/lucasRotava)\
**Post date:** [April 9, 2019, 9:52am UTC](https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015/1 "2019-04-09T09:52:46Z")

</div>

Hello all, I’m starting some work with the HL7618RD module, and I have some problems setting it. The idea is that i configure it after power on of my system. Then, when it is time to upload a file (usually once per hour), i:

1. turn it on
2. wait it to initialize
3. upload the file
4. turn it off

Then i repeat it the next hour. If this fails one time, i run the configuration again (still have to improve this).

This apparently works well until i update the modem’s fw from 1.6 to 1.10. After the modem is updated, it uploads a number of times (i didn’t observe a pattern, sometimes 5 hours, sometimes 1, and so on) and then it stops. When i spy my system i see that the modem is not registering to the network anymore, returning **+CGREG: 4**.

Does anyone have any idea what i might be doing wrong?

Thanks for the support

This is the configuration of the modem i´m doing:

**ATZ**  
**OK**  
**AT+KSLEEP=2**  
**OK**  
**AT&D0**  
**OK**  
**AT&K3**  
**OK**  
**AT+CPMS=“ME”,“ME”,"ME"**  
**+CPMS: 0,32,0,32,0,32**

**OK**  
**AT+CMGF=1**  
**OK**  
**AT+CMEE=1**  
**OK**  
**AT+KSREP=1**  
**OK**  
**AT+KAAT=1**  
**+CME ERROR: 100**  
**AT+WMANTSEL?**  
**+WMANTSEL: 0**

**OK**  
**AT+WMANTSEL=1**  
**OK**  
**AT+CGREG=1**  
**OK**  
**AT+CNMI=0,1,0,0,0**  
**OK**  
**AT+COPS=3,2**  
**OK**  
**AT+COPS?**  
**+COPS: 0,2,“311480”,7**

**OK**  
**AT+WDSI=1023**  
**OK**  
**AT&W**  
**OK**  
**AT+CFUN=1,1**  
**OK**  
**\> Waiting for complete initialization of the modem (+PBREADY)**

**+CGREG: 1**

**+PBREADY**  
**\> Waiting for complete initialization of the modem (KSUP: 0)**

**+SIM: 1**

**+KSUP: 0**

---

<div class="post-metadata">

**Author:** ![Sierra\_klin2](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/sierra_klin2/32/4769_2.png) [@Sierra\_klin2](https://forum.sierrawireless.com/u/Sierra_klin2)\
**Post date:** [April 10, 2019, 7:42am UTC](https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015/2 "2019-04-10T07:42:36Z")

</div>

Hi lucasRotava,  
Could you show me your full log when +CGREG: 4 occurs?

---

<div class="post-metadata">

**Author:** ![lucasRotava](https://avatars.discourse-cdn.com/v4/letter/l/c57346/32.png) [@lucasRotava](https://forum.sierrawireless.com/u/lucasRotava)\
**Post date:** [April 10, 2019, 7:58am UTC](https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015/3 "2019-04-10T07:58:44Z")

</div>

Sure, i´ll update my system and as soon i get the issue i´ll post it.

I forgot to mention, but at the time i revert it back to the previous firmware, the modem is able to register again, that’s why I have to update it again.

---

<div class="post-metadata">

**Author:** ![lucasRotava](https://avatars.discourse-cdn.com/v4/letter/l/c57346/32.png) [@lucasRotava](https://forum.sierrawireless.com/u/lucasRotava)\
**Post date:** [April 10, 2019, 2:51pm UTC](https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015/4 "2019-04-10T14:51:13Z")

</div>

Here is the log, as we can see after i downgrade the fw, the station immediately registers. Could it be that the update process is failing somewhere?

> > Turning modem on

**+WDSI: 0**

**+PBREADY**  
**\>**  
**\>\> Reading modem’s info**  
**\>**  
**AT+KGSN=3**  
**+KGSN: PZ823341430910**

**OK**  
**AT+KGSN=0**  
**+KGSN: 359998071137642**

**OK**  
**AT+CGMM**  
**HL7618RD**

**OK**  
**AT+CGMI**  
**Sierra Wireless**

**OK**  
**ATI3**  
**RHL7618RD.V.1.10.151600.201802201619.x7120m\_1**

**OK**

Manufacturer of modem: Sierra Wireless  
Type of modem: HL7618RD  
Modem firmware version: RHL7618RD.V.1.10.151600.201802201619.x7120m\_1  
IMEI: 359998071137642  
Serial number: PZ823341430910

> > Reading SIM’s info

**ATE1**  
**OK**  
**ATE1**  
**OK**  
**ATE1**  
**OK**  
**AT+CPIN?**  
**+CPIN: READY**

**OK**  
**AT+CIMI**  
**311480998800732**

**OK**  
**AT+CCID**  
**+CCID: 89148000004279045051**

**OK**  
**AT+CPIN?**  
**+CPIN: READY**

**OK**  
**AT+CNUM**  
**+CNUM: “Line 1”,“+15597531530”,145**

**OK**  
SIM’s MCC: 311  
SIM’s MNC: 480  
SIM’s CCID: 89148000004279045051  
SIM’s CIMI: 311480998800732  
SIM’s PIN: READY

> > Basic configuration of the modem
> 
> Waiting for complete initialization of the modem (KSUP: 0)  
> **ATE1**  
> **OK**  
> **ATE1**  
> **OK**  
> **ATE1**  
> **OK**  
> **AT+CPIN?**  
> **+CPIN: READY**

**OK**

> VZW OMADM server to configure PDP context\*\*

**ATE1**  
**OK**  
**ATE1**  
**OK**  
**ATE1**  
**OK**  
**ATZ**  
**OK**  
**AT+KSLEEP=2**  
**OK**  
**AT&D0**  
**OK**  
**AT&K3**  
**OK**  
**AT+CPMS=“ME”,“ME”,“ME”**  
**+CPMS: 22,32,22,32,22,32**

**OK**  
**AT+CMGF=1**  
**OK**  
**AT+CMEE=1**  
**OK**  
**AT+KSREP=1**  
**OK**  
**AT+KAAT=1**  
**+CME ERROR: 100**  
**AT+WMANTSEL?**  
**+WMANTSEL: 1**

**OK**  
**AT+CGREG=1**  
**OK**  
**AT+CNMI=0,1,0,0,0**  
**OK**  
**AT+COPS=3,2**  
**OK**  
**AT+COPS?**  
**+COPS: 0**

**OK**  
**AT+WDSI=1023**  
**OK**  
**AT&W**  
**OK**  
**AT+CFUN=1,1**  
**OK**

> Waiting for complete initialization of the modem (+PBREADY)

**+CGREG: 0**

**+WDSI: 0**

**+PBREADY**

> Waiting for complete initialization of the modem (KSUP: 0)

**+SIM: 1**

**+KSUP: 0**

> > Starting bearer and testing APN
> 
> Waiting for registration in the network (+CGREG: 1 or +CGREG: 5)

> Not registered in the network
> 
> > > Error starting the bearer, trying to restart it
> 
> > > Please, ignore the errors here

**AT+KCNXDOWN=3,1**  
**OK**

\*\*\*\*\*\*\* Here is when I entered in bridge mode and i send the commands by hand:

**+SIM: 1**

**+KSUP: 0**  
**at+cgreg?**  
**+CGREG: 1,4**

**OK**  
**at+cgreg?**  
**+CGREG: 1,4**

**OK**  
**at+cgreg?**  
**+CGREG: 1,4**

**OK**  
**at+wdsf=1**  
**OK**

**+WDSI: 14**

**+CGREG: 0**

**+WDSI: 0**

**+CGREG: 1**

**+PBREADY**

**+SIM: 1**

**+KSUP: 0**

**+WDSI: 17,1**

**+NVBU\_IND: 0,0,“2019/04/10 07:34:31”,“BHL7618RD.V.1.6.151600.201704201024.x7120m\_1”**

**+NVBU\_IND: 0,1,“2019/04/10 07:34:31”,“BHL7618RD.V.1.6.151600.201704201024.x7120m\_1”**

**+NVBU\_IND: 0,2,“2019/04/10 07:34:31”,“BHL7618RD.V.1.6.151600.201704201024.x7120m\_1”**

**+WDSI: 4**

**+WDSI: 6**

**+WDSI: 8**

---

<div class="post-metadata">

**Author:** ![Sierra\_klin2](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/sierra_klin2/32/4769_2.png) [@Sierra\_klin2](https://forum.sierrawireless.com/u/Sierra_klin2)\
**Post date:** [April 12, 2019, 6:15am UTC](https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015/5 "2019-04-12T06:15:16Z")

</div>

Hi lucasRotava,

From your log, I see after you downgrade the package successfully (+WDSI: 17,1) modem get registered.  
Could you try to upgrade by FW.exe to see if issue can be solved?  
And try to select the network manually as below:  
AT+COPS=?  
AT+COPS=1,2,“46001”,2 //2 UMTS

---

<div class="post-metadata">

**Author:** ![lucasRotava](https://avatars.discourse-cdn.com/v4/letter/l/c57346/32.png) [@lucasRotava](https://forum.sierrawireless.com/u/lucasRotava)\
**Post date:** [April 15, 2019, 7:06am UTC](https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015/6 "2019-04-15T07:06:08Z")

</div>

From my other thread, about the WMANTSEL command, i found out that apparently the command AT+WMANTSEL=1 is related to my registration problem. As a test, i left my system without the AT+WMANTSEL=1 command in the initialization of the modem, and until now it is registering and communicating with no problems. I want to try and reproduce this repeatedely now.

Sorry, i cannot work with the FW.exe, this is a remote system (that’s why i am kind of slow to run the tests).

> [@User profile not saved](https://forum.sierrawireless.com/t/user-profile-not-saved/16013/3):
>
> **at+cfun=4**  
> **+CGREG: 0**
> 
> **+CEREG: 0**
> 
> **OK**  
> **at+wmantsel=1**  
> **OK**  
> **at+cfun=1**  
> **OK**
> 
> **+CGREG: 1**
> 
> **+CEREG: 1,“2300”,“008A4C01”,7**  
> **at&w**  
> **OK**  
> **at+wmantsel?**  
> **+WMANTSEL: 1**
> 
> **OK**  
> **at+cfun=1,1**  
> **OK**
> 
> **+WDSI: 0**
> 
> **+PBREADY**
> 
> **+SIM: 1**
> 
> **+KSUP: 0**  
> **at+wmantsel?**  
> **+WMANTSEL: 1**
> 
> **OK**  
> **at+cgreg?**  
> **+CGREG: 1,4**
> 
> **OK**

---

<div class="post-metadata">

**Author:** ![Sierra\_klin2](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/sierra_klin2/32/4769_2.png) [@Sierra\_klin2](https://forum.sierrawireless.com/u/Sierra_klin2)\
**Post date:** [April 15, 2019, 7:45am UTC](https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015/7 "2019-04-15T07:45:39Z")

</div>

How about the antenna connection and the signal quality there(AT+CESQ)?  
I don’t think +WMANTSEL=0/1 will result the registration issue.  
AT+WMANTSEL=0 //Use main and diversity antenna on LTE  
AT+WMANTSEL=1 //Only use main antenna on LTE

I suggest you set  
AT+XCSQ=1 (Enable URC of radio signal strength and quality indication)  
AT+XCSQ=0 (Disable)  
AT+CEREG=2(Enable URC of EPS Network Registration Status).

After +CGREG: 1,4, could you check the following result?  
AT+CESQ  
AT+CEER  
AT+COPS=?  
AT+COPS=1,2,“46001”,7 //LTE， select your own plmn manually

---

<div class="post-metadata">

**Author:** ![lucasRotava](https://avatars.discourse-cdn.com/v4/letter/l/c57346/32.png) [@lucasRotava](https://forum.sierrawireless.com/u/lucasRotava)\
**Post date:** [April 15, 2019, 3:25pm UTC](https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015/8 "2019-04-15T15:25:04Z")

</div>

> Turned on the modem and ran the commands you asked:

```
+SIM: 1

+KSUP: 0
at
OK
at+wmantsel?
+WMANTSEL: 1

OK
ati3
RHL7618RD.V.1.10.151600.201802201619.x7120m_1

OK
at+cgreg?
+CGREG: 1,4

OK
AT+CESQ
+CESQ: 99,99,255,255,255,255

OK
AT+CEER
+CEER: "No report available"

OK
AT+COPS=?

```

> At this point the modem hangs  
> Then i power cycled it to restart

```
+SIM: 1

+KSUP: 0
at+cfun=4
+CGREG: 0

```

> Modem hangs again  
> I restart it again, and now i will send **AT+WMANTSEL=0** (and after a reset, **AT+CFUN=1,1** , it will register) and then send all the commands you asked me again:

```
+SIM: 1

+KSUP: 0
at+cgreg?
+CGREG: 1,4

OK
at+wmantsel?
+WMANTSEL: 1

OK
at+wmantsel=0
OK
at&w
OK
at+cfun=1,1
OK

+CGREG: 0

+WDSI: 0

+CGREG: 1

+CEREG: 1,"2300","008A4C01",7

+PBREADY

+SIM: 1

+KSUP: 0
ati
HL7618RD

OK
ati3
RHL7618RD.V.1.10.151600.201802201619.x7120m_1

OK
AT+CESQ
+CESQ: 99,99,255,255,11,18

OK
at+csq
+CSQ: 9,5

OK
AT+CEER
+CEER: "No report available"

OK
AT+COPS=?
+COPS: (2,"Verizon","Verizon","311480",7,0)

OK

```

> Just put it back to **AT+WMANTSEL=1** , and reset it with **AT+CFUN=1,1** , to see what happens (it does not register and has **+CGREG=1,4** )

```
at+wmantsel=1
OK
at+csq
+CSQ: 9,5

OK
at&w
OK
at+cfun=1,1
OK

+WDSI: 0

+PBREADY

+SIM: 1

+KSUP: 0
at
OK
at+csq
+CSQ: 99,99

OK
at+cgreg?
+CGREG: 1,4

OK
at+cereg?
+CEREG: 2,0

OK
at+cireg?
+CIREG: 0,0

OK
at+creg?
+CREG: 2,0

OK
at+cops=0

```

> Here the modem hangs again (5 minutes and nothing), and when i try to send anything to it i get the **ABORTED** message.

Sorry about the formatting of this post.  
Now about the modem’s issue, is there something i’m doing wrong when configuring the modem? I repeated this process i put here and everytime the same happened, when **AT+WMANTSEL=1** is saved, the modem does not register, when **AT+WMANTSEL=0** is saved, then the modem connects. I have one system running with the **AT+WMANTSEL=0** version, and it is running for 5 days already, and no sign of any problem.

Any ideas?

---

<div class="post-metadata">

**Author:** ![lucasRotava](https://avatars.discourse-cdn.com/v4/letter/l/c57346/32.png) [@lucasRotava](https://forum.sierrawireless.com/u/lucasRotava)\
**Post date:** [April 19, 2019, 9:34am UTC](https://forum.sierrawireless.com/t/hl7618rd-not-registering-to-network/16015/9 "2019-04-19T09:34:07Z")

</div>

Systems still working (without using AT+WMANTSEL=1). Any new ideas on that?
