# HL7588 Firmware Update Weirdness

**URL:** <https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146>\
**Category:** IoT Modules\
**Created:** [April 24, 2020, 12:03am UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146 "2020-04-24T00:03:11Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![lcard](https://avatars.discourse-cdn.com/v4/letter/l/9de0a6/32.png) [@lcard](https://forum.sierrawireless.com/u/lcard)\
**Post date:** [April 24, 2020, 12:03am UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/1 "2020-04-24T00:03:12Z")

</div>

I have updated the firmware on my device and ati10 is now reporting the primary boot firmware version different from the secondary. Is this normal?

ati10  
Modem-Firmware:  
RHL75xx.A.2.15.151600.201809201422.x7160\_3  
HL7588  
HL75xx.A.2.15  
x7160  
FUSED  
2018-09-20 15:32:58  
r12965

Primary-Boot:  
RHL75xx.A.2.13.0202170420.201802201800.x7160\_3  
2018-02-20 18:00:00  
r10178

Secondary-Boot:  
RHL75xx.A.2.15.0202170420.201809201422.x7160\_3  
2018-09-20 14:22:00  
r10178

Update-Agent:  
RHL75xx.A.2.15.0201160412.201809201422.x7160\_3  
2018-09-20 14:22:00  
r12965

4G-Firmware:  
7160.S3.561.40.3.733.00.0000

3G-Firmware:  
202.700.621.43-54.35

OK

---

<div class="post-metadata">

**Author:** ![Vianney](https://avatars.discourse-cdn.com/v4/letter/v/71e660/32.png) [@Vianney](https://forum.sierrawireless.com/u/Vianney)\
**Post date:** [April 24, 2020, 4:32am UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/2 "2020-04-24T04:32:55Z")

</div>

Hi @lcard,  
Which is FW you using? I have upgraded HL7588 to version A.2.15. Primary and Secondary show the same version. You can download the source below:  
[https://source.sierrawireless.com/resources/airprime/software/hl7588-at\_t-firmware/#sthash.dQZbxqge.dpbs](https://source.sierrawireless.com/resources/airprime/software/hl7588-at_t-firmware/#sthash.dQZbxqge.dpbs)

> ati10
> 
> Modem-Firmware:  
> RHL75xx.A.2.15.151600.201809201422.x7160\_3  
> HL7588  
> HL75xx.A.2.15  
> x7160  
> FUSED  
> 2018-09-20 15:32:58  
> r12965
> 
> Primary-Boot:  
> RHL75xx.A.2.15.0202170420.201809201422.x7160\_3  
> 2018-09-20 14:22:00  
> r10178
> 
> Secondary-Boot:  
> RHL75xx.A.2.15.0202170420.201809201422.x7160\_3  
> 2018-09-20 14:22:00  
> r10178
> 
> Update-Agent:  
> RHL75xx.A.2.15.0201160412.201809201422.x7160\_3  
> 2018-09-20 14:22:00  
> r12965
> 
> 4G-Firmware:  
> 7160.S3.561.40.3.733.00.0000
> 
> 3G-Firmware:  
> 202.700.621.43-54.35
> 
> OK

Please share any concerns you have and help us tick **Solution** if your problem is resolved  
Thanks

---

<div class="post-metadata">

**Author:** ![lcard](https://avatars.discourse-cdn.com/v4/letter/l/9de0a6/32.png) [@lcard](https://forum.sierrawireless.com/u/lcard)\
**Post date:** [April 24, 2020, 9:45pm UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/3 "2020-04-24T21:45:52Z")

</div>

I tried to go from 2.13 -\> 2.15. Now everything reports 2.15 except the “Primary-Boot” section still reports 2.13.

Should I try to update the firmware again?

---

<div class="post-metadata">

**Author:** ![Vianney](https://avatars.discourse-cdn.com/v4/letter/v/71e660/32.png) [@Vianney](https://forum.sierrawireless.com/u/Vianney)\
**Post date:** [April 27, 2020, 2:45am UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/4 "2020-04-27T02:45:35Z")

</div>

Hi @lcard,  
Please use the build posted in the link above and try again then share your result. The procedure should be:

- Run installer as Administrator
- It will require a reboot. You can press reboot button or run cfun=1,1 in AT command
- Check version again  
Thanks

---

<div class="post-metadata">

**Author:** ![lcard](https://avatars.discourse-cdn.com/v4/letter/l/9de0a6/32.png) [@lcard](https://forum.sierrawireless.com/u/lcard)\
**Post date:** [April 30, 2020, 2:34am UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/5 "2020-04-30T02:34:10Z")

</div>

The Windows .exe from the above link does not work for me.

When I run this .exe, it prompts me to “reboot my modem”, but I’m using a [Nimbelink S2C enclosure](https://nimbelink.com/products/skywire-s2c-link-accessory-kit/) which does not expose a reset button. I tried connecting a serial cable and terminal to the unit at the same time so I could issue a “CFUN=1,1” for a reset, but the Windows .exe from the above link didn’t recognize this as a modem reset.

I tried using and xmodem transfer as described [here.](https://nimbelink.com/Documentation/Skywire/4G_LTE_Cat_4/1002045_NL-SW-LTE-S7x_Linux-Firmware-Update-Guide.pdf) using [this DWL file.](https://source.sierrawireless.com/~/media/support_downloads/airprime/software/hl7588a/a.2.15/rhl75xx.a.2.15.151600.201809201422.x7160_3_signed_dwl.ashx)

That’s how I got to this state with the Primary-Boot firmware showing a different version number.

Do you have and alternate DWL file I can try?

---

<div class="post-metadata">

**Author:** ![Vianney](https://avatars.discourse-cdn.com/v4/letter/v/71e660/32.png) [@Vianney](https://forum.sierrawireless.com/u/Vianney)\
**Post date:** [May 4, 2020, 6:47am UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/6 "2020-05-04T06:47:11Z")

</div>

Hi @lcard,  
I have some tips for success. Please follow the video for procedure  
I suggest you input at+cfun=1,1 command into the tool first then make double click on EXE then back the tool to press enter to send at+cfun=1,1 command. The window will recognize reset Job

 ![GIF (1)](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/0/0af50098537e365001b4b13119db196f8b744569.gif)  
Please try this and share your result  
For your issue, I also got the same when trying to upgrade by using DWL file. I am checking if it is an issue or legacy behavior  
Please share if you have any concerns and tick Solution if your problem is solved  
Thanks

---

<div class="post-metadata">

**Author:** ![lcard](https://avatars.discourse-cdn.com/v4/letter/l/9de0a6/32.png) [@lcard](https://forum.sierrawireless.com/u/lcard)\
**Post date:** [May 4, 2020, 11:19am UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/7 "2020-05-04T11:19:06Z")

</div>

I believe the problem I’m having with the EXE tool is that it is not finding the correct COM port for the modem. The drivers are installed and I can connect to the modem and issue AT command using a serial console (putty) but the EXE tool does not seem to choose the right port for the modem upgrade.

Is there a way to force the upgrade tool’s COM port selection when I run it?

---

<div class="post-metadata">

**Author:** ![Vianney](https://avatars.discourse-cdn.com/v4/letter/v/71e660/32.png) [@Vianney](https://forum.sierrawireless.com/u/Vianney)\
**Post date:** [May 6, 2020, 2:45am UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/8 "2020-05-06T02:45:38Z")

</div>

Hi @lcard,  
Are you using UART or USB connection for upgrading. EXE firmware should be upgraded via USB. Please check it  
Thanks

---

<div class="post-metadata">

**Author:** ![lcard](https://avatars.discourse-cdn.com/v4/letter/l/9de0a6/32.png) [@lcard](https://forum.sierrawireless.com/u/lcard)\
**Post date:** [May 6, 2020, 12:52pm UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/9 "2020-05-06T12:52:28Z")

</div>

Yes. I am using USB. The USB connection maps two com ports onto my host: USB1 (COM3) and USB2 (COM4). I believe the .EXE firmware tool is choosing the wrong one. It tries to use USB1 but I think it should be using USB2. I can use a terminal program to send AT commands to the USB2 device, but USB1 is not responsive.

Is there a way to force the tool to use USB2?

---

<div class="post-metadata">

**Author:** ![Vianney](https://avatars.discourse-cdn.com/v4/letter/v/71e660/32.png) [@Vianney](https://forum.sierrawireless.com/u/Vianney)\
**Post date:** [May 7, 2020, 3:29am UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/10 "2020-05-07T03:29:45Z")

</div>

Hi @lcard,  
Can you please help to check USB composition by command  
at+kusbcomp?  
If at+kusbcomp=2 please change it to at+kusbcomp=0. New configuration will only be activated after the module reboots (at+cfun=1,1). Then try to upgrade again  
In theory, there’s no way to force the tool to use USB2 for upgrading. However, there’s a topic suggest a workaround to do it. If the above doesn’t work you can take a look this for more detail

> [@Dev kit HL8548-G firmware](https://forum.sierrawireless.com/t/dev-kit-hl8548-g-firmware/8175/9):
>
> Hello!, I had the same problem, mentioned in another thread: Upgrade over USB didn’t work I got timeouts every try, or driver didn’t get correctly loaded on every reset. So you can do the upgrade also over the serial port. But there is no documentation and the flasher uses always USB1, so the trick is to put the attached .ini file in the %APPDATA% folder (just enter %APPDATA% in the explorer). In the .ini file you can specify another uart and baudrate: [CommPort] Port=COM1 ComBaud=115200 Th…

Please share any concerns you have and tick Solution if your problem is solved  
Thanks

---

<div class="post-metadata">

**Author:** ![lcard](https://avatars.discourse-cdn.com/v4/letter/l/9de0a6/32.png) [@lcard](https://forum.sierrawireless.com/u/lcard)\
**Post date:** [May 9, 2020, 6:00pm UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/11 "2020-05-09T18:00:07Z")

</div>

I was able to use that post to get the update tools to connect to to the proper port, but now the update tools is reporting " Warning: Chip mismatch. HW is [None] SW expects [XG716]". I think the device firmware must be corrupt.

Unless you have anything else to try, I’m willing to give up at this point.

Thanks for your help.

-Loren

---

<div class="post-metadata">

**Author:** ![Vianney](https://avatars.discourse-cdn.com/v4/letter/v/71e660/32.png) [@Vianney](https://forum.sierrawireless.com/u/Vianney)\
**Post date:** [May 13, 2020, 7:01am UTC](https://forum.sierrawireless.com/t/hl7588-firmware-update-weirdness/20146/13 "2020-05-13T07:01:31Z")

</div>

Hi @lcard  
Have you ever used some GPIO for the shutdown control? We have a legacy issue that the module cannot boot up when power up with GPIO\_1 or GPIO\_5 pull low. You can refer the topic below for the fix

> [@USB not detecting HL7688 after firmware update](https://forum.sierrawireless.com/t/usb-not-detecting-hl7688-after-firmware-update/16523/6):
>
> Hi Harish, Thanks for your logs. We have fixed a similar issue in INT7160ATT-2162. In FW\>=A.2.11, module cannot boot up when power up with GPIO\_1 or GPIO\_5 pull low. Issue now is fixed on A.2.20.1 Please try test in A.2.20.1. (You should remove .z in the filename then unzip them) [RHL75xx.A.2.20.151600.201903181615.x7160\_1\_signed.7z.001.z (4 MB)](https://forum.sierrawireless.com/uploads/short-url/xTlMKq48pMvjSHa3WBWv0cAQHGG.z) [RHL75xx.A.2.20.151600.201903181615.x7160\_1\_signed.7z.002.z (4 MB)](https://forum.sierrawireless.com/uploads/short-url/eYd2dr0FULcKAVMhT1UyFw5j6Y3.z) [RHL75xx.A.2.20.151600.201903181615.x7160\_1\_signed.7z.003.z (343.3 KB)](https://forum.sierrawireless.com/uploads/short-url/ziTGiWUOCseLWJn8GuXaXBvsCBY.z)

Thanks
