# HL6528RD Network Registration Fail

**URL:** <https://forum.sierrawireless.com/t/hl6528rd-network-registration-fail/26175>\
**Category:** IoT Modules\
**Created:** [February 7, 2022, 2:18am UTC](https://forum.sierrawireless.com/t/hl6528rd-network-registration-fail/26175 "2022-02-07T02:18:05Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![chuichunwing](https://avatars.discourse-cdn.com/v4/letter/c/85f322/32.png) [@chuichunwing](https://forum.sierrawireless.com/u/chuichunwing)\
**Post date:** [February 7, 2022, 2:18am UTC](https://forum.sierrawireless.com/t/hl6528rd-network-registration-fail/26175/1 "2022-02-07T02:18:05Z")

</div>

Hi guys, I have a critical problem that cannot register the network. I always get +CREG 0,0 and +CREG 0,2.  
Sim card status is ready.  
I am sure the sim card can get the network normally by testing in other bands of 2G modules.  
I can search the operators’ information by +COPS=?. However, when i try to manually set the operators by AT+COPS=1,0,“FULL Name of the operator”, it returns ERROR.

I tried another HL6528RD, I got the same results. I guess it may be the firmware problem, and I upgrade it to form 2.4.3 to 2.5.1, i got the same results too. I have no idea about that. Please help.

---

<div class="post-metadata">

**Author:** ![jerdung](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@jerdung](https://forum.sierrawireless.com/u/jerdung)\
**Post date:** [February 7, 2022, 2:47am UTC](https://forum.sierrawireless.com/t/hl6528rd-network-registration-fail/26175/2 "2022-02-07T02:47:07Z")

</div>

Hi chuichunwing,

Please try to use AT+COPS=0 instead.

Thanks,

---

<div class="post-metadata">

**Author:** ![chuichunwing](https://avatars.discourse-cdn.com/v4/letter/c/85f322/32.png) [@chuichunwing](https://forum.sierrawireless.com/u/chuichunwing)\
**Post date:** [February 7, 2022, 3:27am UTC](https://forum.sierrawireless.com/t/hl6528rd-network-registration-fail/26175/3 "2022-02-07T03:27:58Z")

</div>

Thanks.  
Yes, I tried but failed. The default is +COP=0.

---

<div class="post-metadata">

**Author:** ![jerdung](https://avatars.discourse-cdn.com/v4/letter/j/82dd89/32.png) [@jerdung](https://forum.sierrawireless.com/u/jerdung)\
**Post date:** [February 7, 2022, 10:48am UTC](https://forum.sierrawireless.com/t/hl6528rd-network-registration-fail/26175/4 "2022-02-07T10:48:14Z")

</div>

Hi chuichunwing,

What is your network operator? Please show your results of the command below:

AT+COPS=?  
AT\*PSRDBS?

Thanks,

---

<div class="post-metadata">

**Author:** ![chuichunwing](https://avatars.discourse-cdn.com/v4/letter/c/85f322/32.png) [@chuichunwing](https://forum.sierrawireless.com/u/chuichunwing)\
**Post date:** [February 8, 2022, 3:14am UTC](https://forum.sierrawireless.com/t/hl6528rd-network-registration-fail/26175/5 "2022-02-08T03:14:41Z")

</div>

Hi Jerdung,

I get 3 operators, as it is related to the customer, I can’t show in here. The return is like that:  
+COPS: (2,“xxxxxx”,“yyyyyy”,“zzzzz”,0), (3,“aaaaaaaaaaaa”,“bbbbbbbbb”,“cccccc”,0), (1,“iiiiii”,“jjjjjj”,“kkkkkk”,0),(0-4),(0-2)

AT\*PSRDBS?  
12

The country are supported GSM 900 and 1800, so I set to 12
