# Hilonc V2 - Network Registration

**URL:** <https://forum.sierrawireless.com/t/hilonc-v2-network-registration/7445>\
**Category:** Legacy HL Series\
**Created:** [September 19, 2014, 9:19am UTC](https://forum.sierrawireless.com/t/hilonc-v2-network-registration/7445 "2014-09-19T09:19:30Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![hestia](https://avatars.discourse-cdn.com/v4/letter/h/6bbea6/32.png) [@hestia](https://forum.sierrawireless.com/u/hestia)\
**Post date:** [July 18, 2019, 2:03pm UTC](https://forum.sierrawireless.com/t/hilonc-v2-network-registration/7445/4 "2019-07-18T14:03:01Z")

</div>

Hi,  
I also have troubles with Hilonc V2 /HL6528RD network registration (for GSM).  
I have at least a hundred Hilonc V2 in the field. According to my experience, when modem is set once with AT+COPS=0 (default settings). The modem is automatically re registering when it can. No need to reset.

However, on one site, with a Orange business card, I have the following issue:  
It has been working like a charm for several month and then, one day, the modem has been unregistered.  
Even if the signal is OK, the modem never get reregistered. I also tried to reset the modem several times but it always come back with good signal, operator name BUT unable to register.

Here the logs :

> Blockquote  
> send[0]:AT+CSQ#015  
> RECV[0]:+CSQ: 17,99  
> RECV[0]:OK  
> send[0]:AT\*PSNTRG?#015  
> RECV[0]:\*PSNTRG: 0,0,“208”,“01”,“”,“”,“Orange F”,0  
> RECV[0]:OK

I’m thinking whether this is an operator problem? Or maybe should I set some operator parameters manually?  
Thanks in advance for your feedback  
Thomas

---

_[View the full topic](https://forum.sierrawireless.com/t/hilonc-v2-network-registration/7445)._