# \[Hilo\] Is it possible keep DCD in OFF when sending SMS?

**URL:** <https://forum.sierrawireless.com/t/hilo-is-it-possible-keep-dcd-in-off-when-sending-sms/6497>\
**Category:** HL Series FAQ\
**Created:** [July 19, 2013, 6:24am UTC](https://forum.sierrawireless.com/t/hilo-is-it-possible-keep-dcd-in-off-when-sending-sms/6497 "2013-07-19T06:24:21Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![FAQ\_Poster](https://avatars.discourse-cdn.com/v4/letter/f/f9ae1b/32.png) [@FAQ\_Poster](https://forum.sierrawireless.com/u/FAQ_Poster)\
**Post date:** [July 19, 2013, 6:24am UTC](https://forum.sierrawireless.com/t/hilo-is-it-possible-keep-dcd-in-off-when-sending-sms/6497/1 "2013-07-19T06:24:21Z")

</div>

[Hilo] Is it possible keep DCD signal in OFF(inactive) status when sending a SMS? Can \<AT&C2\> work for that?

Answer: No. Hilo respects TS 27.005 definition, so:

- The DCD signal shall be in ON state while text is entered
- The DCD signal shall be in ON state while PDU is given

AT&C0 can always keep DCD signal in ON(active) status.  
AT7C2 is not supported.
